Use AI with an adult nearby, and check answers together.

Senior Secondary

Technical Drawing

AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →
Three prompts in each subject are free to try. One subscription opens every subject and every prompt in senior secondary, or subscribe your whole school. Already have a code? Enter it here.
Clear

197 prompts matching "Five standard abbreviations with meanings"

Quiz: Set out a segmental arch geometrically and mark voussoir joints radiating to the centre

Set me a quick recall test on set out a segmental arch geometrically and mark voussoir joi

Practice set: Compression in an arch by building a small arch of wooden blocks over a former

Give me a practice set on compression in an arch by building a small arch of wooden blocks

Spot my mistake: Seven parts of an arch on a given drawing

Show me a worked example on seven parts of an arch on a given drawing with an error somewh

Teach me: Tread, riser, going, nosing, string, newel post, baluster, handrail, landing and soffit

Be my SS2 Technical Drawing teacher for this one point: tread, riser, going, nosing, strin

Quiz: Straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral staircases

Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral

Project task: Calculating the number of risers for a 3000 mm rise at 150 mm per riser

Give me a practical task on calculating the number of risers for a 3000 mm rise at 150 mm

Practice set: Calculating the number of risers and the going for a floor-to-floor height of 3000 mm

Set me five practice tasks on calculating the number of risers and the going for a floor-t

Spot my mistake: Drawing a sectional elevation of a dog-leg staircase to 1:50 and label eight parts

Show me a worked example on drawing a sectional elevation of a dog-leg staircase to 1:50 a

Teach me: Preparing to 1:10 a detailed vertical section through a strip foundation

You are my personal SS2 Technical Drawing tutor. Teach me preparing to 1:10 a detailed ver

Quiz: On the same detail the damp-proof course

I am revising Building Details I for SS2 Technical Drawing. Test me on the same detail the

Practice set: Detail on the board one layer at a time

Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin

Practice set: The minimum bearing for a lintel over a 900 mm opening

Set me five practice tasks on the minimum bearing for a lintel over a 900 mm opening, at t

Quiz: Lean-to, gable, hipped, gambrel, mansard and flat roofs

Set me a quick recall test on lean-to, gable, hipped, gambrel, mansard and flat roofs at S

Teach me: Drawing the plan of a hipped roof showing hips, valleys and the run of the common rafters

Be my SS2 Technical Drawing teacher for this one point: drawing the plan of a hipped roof

Quiz: Assessed AO2, and roof types and members recur in WAEC and NECO

Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T

Practice set: Tension and compression members on a board sketch of a king post truss

Give me a practice set on tension and compression members on a board sketch of a king post

Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used

Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me

© 2026 PromptPaddi Limited. All rights reserved.