Technical Drawing

Give me a practice set on comparing the two curves and account for any difference for SS2

You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a

Give me a practice set on lay a plastic gear or bicycle sprocket over their finished invol

Show me a worked example on two products that use an involute profile with an error somewh

Show me a worked example on here the locus plot supplies the evidence with an error somewh

Show me a worked example on what happens to the output at a dead-centre position with an e

Show me a worked example on why the cut face appears as a straight line in one view and an

Give me a practice set on one truncated hexagonal prism on the board for SS2 Technical Dra

Set me five practice tasks on labelling the cutting plane, viewing arrows, at the level ex

Show me a worked example on cut, fold and assemble the developments in cardboard with an e

Show me how display the finished models beside the drawings works in real life in Nigeria.

Set me five practice tasks on your model against the drawing, at the level expected in SS2

Set me a small project on drawing two cylinders of 50 mm and 30 mm diameter meeting at 90

Show me how building the card assembly, test the fit works in real life in Nigeria. Use on

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Show me a worked example on three uses of perspective drawing and distinguish it from isom

Give me a practice set on out the standard layout on the board, moving the station point t

Write a short SS2 Technical Drawing answer about set out two vanishing points on the horiz

Give me a practice set on arranging three cut-out views on the desk in first angle order f

Show me a worked example on dimension a drawing using the aligned and the unidirectional s