228 prompts matching "Drawing a tangent that meets the radius at the point of contact at any convenien"
Spot my mistake: Producing vertical and inclined lettering to consistent height
Show me a worked example on producing vertical and inclined lettering to consistent height
Spot my mistake: 4. Apply studio rules consistently and maintain instruments in working order
Show me a worked example on 4. Apply studio rules consistently and maintain instruments in
Spot my mistake: Practise healthy habits
Show me a worked example on practise healthy habits with an error somewhere in it. Do not
WAEC prep: Producing a hazard-and-control chart
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Teach me: 1. Define an angle
I am an SS1 student studying Angles and Triangles I in Technical Drawing. Explain 1. Defin
Spot my mistake: Success: every constructed angle within ±1° when checked with a protractor
Show me a worked example on success: every constructed angle within ±1° when checked with
Let me explain: 3. Construct a triangle given three sides
Act as my study partner. I will teach you 3. Construct a triangle given three sides in my
Quiz: 4. Construct eccentric and concentric circles to given dimensions
Set me a quick recall test on 4. Construct eccentric and concentric circles to given dimen
Spot my mistake: Constructing an inscribed, a circumscribed and an escribed circle for a given triangle
Show me a worked example on constructing an inscribed, a circumscribed and an escribed cir
WAEC prep: Marks recorded against each objective
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
WAEC prep: Success: all six diagram pairs correctly judged with a valid geometric reason for each
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: Constructing arcs internally touching, externally enclosing and mixed for two circles
Show me a worked example on constructing arcs internally touching, externally enclosing an
WAEC prep: Constructing an ellipse by three methods and a cycloid
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Practice set: Success: ellipse constructed by all three methods
Set me five practice tasks on success: ellipse constructed by all three methods, at the le
WAEC prep: Preparing pyramid and cone developments
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Practice set: Success: both folded models close with a gap of less than 2 mm
Set me five practice tasks on success: both folded models close with a gap of less than 2
Spot my mistake: Preparing developments of prisms and cylinders and develop models of geometrical solids
Show me a worked example on preparing developments of prisms and cylinders and develop mod
Project task: Three views of a stepped block from a physical model
Set me a small project on three views of a stepped block from a physical model, the kind I
Practice set: First- and third-angle projection compared
Set me five practice tasks on first- and third-angle projection compared, at the level exp
Spot my mistake: Producing three correct views of a given solid
Show me a worked example on producing three correct views of a given solid with an error s