296 prompts matching "Quiz: Develop the surfaces of the intersecting prisms and pyramids, showing the"
Let me explain: Reading weld size and length from a symbol
I have just studied reading weld size and length from a symbol in my SS3 Technical Drawing
Practice set: Annotating a joint with the correct weld symbol
Act as my SS3 Technical Drawing tutor. Give me five practice questions on annotating a joi
Teach me: What a tolerance is and why it is specified
You are my personal SS3 Technical Drawing tutor. Teach me what a tolerance is and why it i
Let me explain: Clearance, interference and transition fits
I have just studied clearance, interference and transition fits in my SS3 Technical Drawin
Let me explain: Bolts, studs and set screws
I have just studied bolts, studs and set screws in my SS3 Technical Drawing class. Let me
Let me explain: Spring washers and tab washers
I have just studied spring washers and tab washers in my SS3 Technical Drawing class. Let
WAEC prep: Split pins and wiring as locking methods
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
WAEC prep: Parts that are never sectioned, and why
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Let me explain: Removed and revolved sections
I have just studied removed and revolved sections in my SS3 Technical Drawing class. Let m
Practice set: Choosing the right section type for a given part
Act as my SS3 Technical Drawing tutor. Give me five practice questions on choosing the rig
Teach me: Cavalier and cabinet oblique
You are my personal SS3 Technical Drawing tutor. Teach me cavalier and cabinet oblique, us
Let me explain: Oblique circles and curves
I have just studied oblique circles and curves in my SS3 Technical Drawing class. Let me e
Teach me: How the object sits relative to the planes in first angle
You are my personal SS3 Technical Drawing tutor. Teach me how the object sits relative to
WAEC prep: The angle a line makes with the horizontal plane
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Practice set: Finding true length and both inclinations
Act as my SS3 Technical Drawing tutor. Give me five practice questions on finding true len
Spot my mistake: Treating an ellipse as a shape struck from four centres rather than plotted as a locus
Act as my SS3 Technical Drawing tutor. Write a short answer on treating an ellipse as a sh
Spot my mistake: Placing the plan above the front view in first angle projection
Act as my SS3 Technical Drawing tutor. Write a short answer on placing the plan above the
Spot my mistake: Projecting an auxiliary view at right angles to the frontal plane rather than to the inclined face
Act as my SS3 Technical Drawing tutor. Write a short answer on projecting an auxiliary vie
Spot my mistake: Hatching the whole sectional view rather than only what the cutting plane passes through
Act as my SS3 Technical Drawing tutor. Write a short answer on hatching the whole sectiona
Spot my mistake: Assuming every floor in a building is a solid floor cast on the ground
Act as my SS3 Technical Drawing tutor. Write a short answer on assuming every floor in a b