Use AI with an adult nearby, and check answers together.

Senior Secondary

Technical Drawing

AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →
Three prompts in each subject are free to try. One subscription opens every subject and every prompt in senior secondary, or subscribe your whole school. Already have a code? Enter it here.
Clear

287 prompts matching "The conventions of BS 1192 for building drawings"

Spot my mistake: Ten common building tools

Write a short SS2 Technical Drawing answer about ten common building tools that contains t

Practice set: Sketching freehand, in pictorial view, four building tools in correct proportion within twenty

Set me five practice tasks on sketching freehand, in pictorial view, four building tools i

WAEC prep: Four types of foundation

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation

Show me how comparing louvred, casement and sliding windows for ventilation works in real

Let me explain: An arch and a reinforced concrete lintel compared

I am going to explain an arch and a reinforced concrete lintel compared to you, as an SS2

Project task: Set out a segmental arch of 900 mm span

Set me a small project on set out a segmental arch of 900 mm span, the kind I could finish

Practice set: Real stair in the school with the class

Give me a practice set on real stair in the school with the class for SS2 Technical Drawin

Real-life Nigeria: Sketching two further staircase types and label six parts on each

Show me how sketching two further staircase types and label six parts on each works in rea

Practice set: Detail on the board one layer at a time

Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin

Real-life Nigeria: Marking each other's sheets against a five-point checklist

Take marking each other's sheets against a five-point checklist out of the textbook. Descr

WAEC prep: Six roof types from given sketches

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Let me explain: Constructing a parabola inside a given rectangle 100 mm by 60 mm by the intersecting-lines

I am going to explain constructing a parabola inside a given rectangle 100 mm by 60 mm by

Spot my mistake: Constructing a hyperbola from given foci and a constant difference of 30 mm

Give me a wrong or muddled explanation of constructing a hyperbola from given foci and a c

Practice set: Describe, with an annotated sketch, one product whose form follows a parabola

Set me five practice tasks on describe, with an annotated sketch, one product whose form f

Spot my mistake: Two products that use an involute profile

Show me a worked example on two products that use an involute profile with an error somewh

Spot my mistake: Here the locus plot supplies the evidence

Show me a worked example on here the locus plot supplies the evidence with an error somewh

Project task: Twelve-position method on the board, stressing that each crank position gives one new position

Set me a small project on twelve-position method on the board, stressing that each crank p

Spot my mistake: What happens to the output at a dead-centre position

Show me a worked example on what happens to the output at a dead-centre position with an e

Practice set: The four conic sections and the cutting plane that produces each

Set me five practice tasks on the four conic sections and the cutting plane that produces

Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another

Show me a worked example on why the cut face appears as a straight line in one view and an

© 2026 PromptPaddi Limited. All rights reserved.