296 prompts matching "The meaning of development and its applications"
Let me explain: Removed and revolved sections
I have just studied removed and revolved sections in my SS3 Technical Drawing class. Let m
Practice set: Choosing the right section type for a given part
Act as my SS3 Technical Drawing tutor. Give me five practice questions on choosing the rig
Teach me: Cavalier and cabinet oblique
You are my personal SS3 Technical Drawing tutor. Teach me cavalier and cabinet oblique, us
Quiz: Choosing the face to place parallel to the plane
Act as my SS3 Technical Drawing tutor and quiz me on choosing the face to place parallel t
Let me explain: Oblique circles and curves
I have just studied oblique circles and curves in my SS3 Technical Drawing class. Let me e
WAEC prep: The angle a line makes with the horizontal plane
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Practice set: Finding true length and both inclinations
Act as my SS3 Technical Drawing tutor. Give me five practice questions on finding true len
WAEC prep: The angle between two intersecting planes
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Spot my mistake: Treating an ellipse as a shape struck from four centres rather than plotted as a locus
Act as my SS3 Technical Drawing tutor. Write a short answer on treating an ellipse as a sh
Spot my mistake: Placing the plan above the front view in first angle projection
Act as my SS3 Technical Drawing tutor. Write a short answer on placing the plan above the
Spot my mistake: Projecting an auxiliary view at right angles to the frontal plane rather than to the inclined face
Act as my SS3 Technical Drawing tutor. Write a short answer on projecting an auxiliary vie
Spot my mistake: Hatching the whole sectional view rather than only what the cutting plane passes through
Act as my SS3 Technical Drawing tutor. Write a short answer on hatching the whole sectiona
Spot my mistake: Assuming every floor in a building is a solid floor cast on the ground
Act as my SS3 Technical Drawing tutor. Write a short answer on assuming every floor in a b
Spot my mistake: Reading a floor plan as a view from above rather than as a horizontal section through the building
Act as my SS3 Technical Drawing tutor. Write a short answer on reading a floor plan as a v
Spot my mistake: Assuming a raft foundation is chosen where the ground is strongest
Act as my SS3 Technical Drawing tutor. Write a short answer on assuming a raft foundation
Spot my mistake: Reading a weld symbol below the reference line as though it sat above it
Act as my SS3 Technical Drawing tutor. Write a short answer on reading a weld symbol below
Spot my mistake: Measuring the angle between two planes in a view where neither appears as an edge
Act as my SS3 Technical Drawing tutor. Write a short answer on measuring the angle between
Let me explain: The second auxiliary projection
I have just studied the second auxiliary projection in my SS3 Technical Drawing class. Let
Let me explain: The part or local section
I have just studied the part or local section in my SS3 Technical Drawing class. Let me ex
Let me explain: Drawing an isometric circle by the four-centre method
I have just studied drawing an isometric circle by the four-centre method in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in: