287 prompts matching "Let me explain: 1. State the purpose of drawing standards"
Spot my mistake: Constructing orthographic views of a truncated solid in AutoCAD
Show me a worked example on constructing orthographic views of a truncated solid in AutoCA
Quiz: Applying a dimension style with 3 mm text
I am revising Computer-Aided Drawing II for SS2 Technical Drawing. Test me on applying a d
Project task: Plotting six points at given distances above the HP
Give me a practical task on plotting six points at given distances above the HP from Trace
Spot my mistake: Why a line parallel to a plane appears in true length in the view taken on that plane
Show me a worked example on why a line parallel to a plane appears in true length in the v
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
Teach me: By shape a trowel, plumb bob, spirit level, mason's square, float, bolster and jointer
I am an SS2 student studying Building Tools and Freehand Sketching in Technical Drawing. E
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
Teach me: Semicircular, segmental, flat or camber, pointed and relieving arches
I am an SS2 student studying Openings II: Arches and Lintels in Technical Drawing. Explain
Practice set: Real stair in the school with the class
Give me a practice set on real stair in the school with the class for SS2 Technical Drawin
Real-life Nigeria: Sketching two further staircase types and label six parts on each
Show me how sketching two further staircase types and label six parts on each works in rea
WAEC prep: Drawing to 1:10 a vertical section through a strip foundation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Building a simple card or straw truss, load it at the apex
Show me how building a simple card or straw truss, load it at the apex works in real life
Spot my mistake: Constructing a hyperbola from given foci and a constant difference of 30 mm
Give me a wrong or muddled explanation of constructing a hyperbola from given foci and a c
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Real-life Nigeria: Building a working card model of a simple four-bar linkage from strips
Show me how building a working card model of a simple four-bar linkage from strips works i
Project task: Drawing a 40 mm side hexagonal prism 80 mm high truncated at 35 degrees
Set me a small project on drawing a 40 mm side hexagonal prism 80 mm high truncated at 35
Spot my mistake: Suggest, with reasons, a suitable board thickness and folding method for a small retail carton
Show me a worked example on suggest, with reasons, a suitable board thickness and folding
Practice set: Drawing a stepped block in two-point perspective with vanishing points 300 mm apart
Set me five practice tasks on drawing a stepped block in two-point perspective with vanish
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co