279 prompts matching "The principle of orthographic projection"
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
Project task: Cutting their true shape from card, hold it in the model at the stated inclination
Give me a practical task on cutting their true shape from card, hold it in the model at th
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
Spot my mistake: Seven parts of an arch on a given drawing
Show me a worked example on seven parts of an arch on a given drawing with an error somewh
Practice set: Real stair in the school with the class
Give me a practice set on real stair in the school with the class for SS2 Technical Drawin
Spot my mistake: Drawing a sectional elevation of a dog-leg staircase to 1:50 and label eight parts
Show me a worked example on drawing a sectional elevation of a dog-leg staircase to 1:50 a
Spot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines
Practice set: Detail on the board one layer at a time
Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin
Project task: Drawing the full detail to 1:10 on A3, annotate every layer
Set me a small project on drawing the full detail to 1:10 on A3, annotate every layer, the
Practice set: The minimum bearing for a lintel over a 900 mm opening
Set me five practice tasks on the minimum bearing for a lintel over a 900 mm opening, at t
Teach me: Applying conventions for radii, diameters, holes, chamfers and repeated features
You are my personal SS2 Technical Drawing tutor. Teach me applying conventions for radii,
Quiz: Assessed AO3, with marks lost for duplicated or ambiguous dimensions
I am revising Orthographic Projection II for SS2 Technical Drawing. Test me on assessed AO
Practice set: Fully dimension a given third angle drawing, using at least twelve dimensions from stated datums
Set me five practice tasks on fully dimension a given third angle drawing, using at least
Teach me: Add a sectional view on a stated cutting plane, hatched at 45 degrees, and label it A-A
I am an SS2 student studying Orthographic Projection III in Technical Drawing. Explain add
Real-life Nigeria: Converting a given first angle drawing into an isometric view
Show me how converting a given first angle drawing into an isometric view works in real li
Spot my mistake: Drawing a four-bar linkage to given link lengths and set out twelve crank positions
Give me a wrong or muddled explanation of drawing a four-bar linkage to given link lengths
Let me explain: Assessed AO3, and intersecting cylinders appear in WAEC and NECO Paper 2
I am going to explain assessed AO3, and intersecting cylinders appear in WAEC and NECO Pap
Quiz: Drawing a circle in perspective by enclosing it in a square and plotting eight points
Set me a quick recall test on drawing a circle in perspective by enclosing it in a square
Spot my mistake: Set up an AutoCAD drawing: units, limits
Give me a wrong or muddled explanation of set up an AutoCAD drawing: units, limits from th