296 prompts matching "2. Draw a circle and label its parts correctly"
Let me explain: Clearance, interference and transition fits
I have just studied clearance, interference and transition fits in my SS3 Technical Drawin
WAEC prep: Parts that are never sectioned, and why
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Teach me: The offset section and its stepped cutting plane
You are my personal SS3 Technical Drawing tutor. Teach me the offset section and its stepp
Let me explain: Oblique circles and curves
I have just studied oblique circles and curves in my SS3 Technical Drawing class. Let me e
WAEC prep: Reading a third angle drawing correctly
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Spot my mistake: Dimensioning every part fully on an assembly drawing
Act as my SS3 Technical Drawing tutor. Write a short answer on dimensioning every part ful
Spot my mistake: Drawing the true helix of a screw thread rather than its conventional representation
Act as my SS3 Technical Drawing tutor. Write a short answer on drawing the true helix of a
Teach me: The A2 ISO drawing board and how the sheet is fixed to it
You are my personal SS3 Technical Drawing tutor. Teach me the A2 ISO drawing board and how
Practice set: Setting up a drawing sheet with border and title block
Act as my SS3 Technical Drawing tutor. Give me five practice questions on setting up a dra
Teach me: Why a sectional view is drawn and how it is hatched
You are my personal SS3 Technical Drawing tutor. Teach me why a sectional view is drawn an
Spot my mistake: A drawing that misuses a standard symbol
Act as my SS3 Technical Drawing tutor. Write a short answer on a drawing that misuses a st
Let me explain: The detail drawing and what it must show
I have just studied the detail drawing and what it must show in my SS3 Technical Drawing c
Practice set: Drawing a detail at a wall and beam junction
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a detail
Let me explain: Drawing an isometric circle by the four-centre method
I have just studied drawing an isometric circle by the four-centre method in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in:
Spot my mistake: Treating isometric drawing and true isometric projection as giving a view of the same size
Act as my SS3 Technical Drawing tutor. Write a short answer on treating isometric drawing
Practice set: Dimensioning a given outline correctly
Act as my SS3 Technical Drawing tutor. Give me five practice questions on dimensioning a g
Teach me: Dividing a straight line into equal parts by construction
You are my personal SS3 Technical Drawing tutor. Teach me dividing a straight line into eq
Practice set: Dividing a stated line into seven equal parts
Act as my SS3 Technical Drawing tutor. Give me five practice questions on dividing a state
WAEC prep: Dividing an angle into a given number of equal parts
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
WAEC prep: Constructing a polygon within a given circle
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi