228 prompts matching "Constructing circles in contact with one another"
Practice set: Success: all ten circle parts correctly labelled and spacings accurate to 0.5 mm
Set me five practice tasks on success: all ten circle parts correctly labelled and spacing
Practice set: Success: five dimensions set off from the diagonal scale correct within 0.5 mm
Set me five practice tasks on success: five dimensions set off from the diagonal scale cor
Spot my mistake: Success: every corresponding side within 1% of the calculated length
Show me a worked example on success: every corresponding side within 1% of the calculated
Quiz: 2. State the principles of converting the shape of a plane figure into another of equal area
Set me a quick recall test on 2. State the principles of converting the shape of a plane f
Practice set: Completing the four standard equal-area constructions on one sheet
Give me a practice set on completing the four standard equal-area constructions on one she
Spot my mistake: Success: calculated areas of original and converted figures agree within 2%
Show me a worked example on success: calculated areas of original and converted figures ag
Practice set: Success: radius and tangent perpendicular within ±1° at every point of tangency
Set me five practice tasks on success: radius and tangent perpendicular within ±1° at ever
Spot my mistake: 1. Construct an arc of given radius internally touching two circles
Write a short SS1 Technical Drawing answer about 1. Construct an arc of given radius inter
Teach me: 2. Construct an arc of given radius externally enclosing two circles
I am an SS1 student studying Tangents and Tangency II in Technical Drawing. Explain 2. Con
Spot my mistake: 3. Construct a cycloid and a trochoid from a rolling circle
Write a short SS1 Technical Drawing answer about 3. Construct a cycloid and a trochoid fro
WAEC prep: Constructing an ellipse by three methods and a cycloid
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
WAEC prep: Preparing pyramid and cone developments
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: Success: both drawings fully dimensioned
Show me a worked example on success: both drawings fully dimensioned with an error somewhe
Spot my mistake: Success: four-centre ellipses drawn correctly in all three planes with smooth arc junctions
Show me a worked example on success: four-centre ellipses drawn correctly in all three pla
WAEC prep: Constructing oblique drawings by the box and centre-layout methods
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Practice set: Success: cabinet oblique drawn with receding dimensions correctly halved
Set me five practice tasks on success: cabinet oblique drawn with receding dimensions corr
Spot my mistake: 1. Explain what CAD is and compare CAD with manual drawing for accuracy, revision and storage
Show me a worked example on 1. Explain what CAD is and compare CAD with manual drawing for
WAEC prep: Success: sheet completed with correct pencil grade for outline, construction and dimension lines
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
WAEC prep: Success: all letters within ±0.5 mm of the guide-line height with uniform stroke thickness
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
WAEC prep: Success: division into seven parts accurate to within 0.5 mm across the whole line
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o