Technical Drawing

Show me a worked example on 4. Construct a simple isometric drawing of a rectangular solid

Be my SS1 Technical Drawing teacher for this one point: 2. Demonstrate the types of obliqu

You are my personal SS1 Technical Drawing tutor. Teach me 2. Use a graphics package for le

Show me a worked example on success: a correctly named and exported file produced that mat

Let me talk you through 3. State the advantages of CADD over manual drawing from the Drawi

Write a short SS1 Technical Drawing answer about 4. Use drawing materials and instruments

I am an SS1 student studying Board Practice: Title Block and Lettering in Technical Drawin

Set me a quick recall test on 2. Prepare a title block and border to standard proportions

Set me five practice tasks on constructing the special angles without a protractor, at the

Show me a worked example on success: every constructed angle within ±1° when checked with

Set me a small project on constructing a specified triangle accurately within a time limit

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Take drawing a large circle and label all named parts out of the textbook. Describe a real

Let me talk you through 1. State the purpose of drawing standards from the Drawing Standar

Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their

Give me a wrong or muddled explanation of 4. Construct a diagonal scale and use it to read

Show me a worked example on success: calculated areas of original and converted figures ag

Set me five practice tasks on success: radius and tangent perpendicular within ±1° at ever

Set me five practice tasks on success: both folded models close with a gap of less than 2

Write a short SS1 Technical Drawing answer about 4. Interpret a three-view orthographic dr