Technical Drawing

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Let me talk you through 1. State the purpose of drawing standards from the Drawing Standar

I am an SS1 student studying Drawing Standards and Conventions in Technical Drawing. Expla

Show me a worked example on drawing and interpret both projection symbols with an error so

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p

Set me a quick recall test on 2. Identify the types of scales: plain, diagonal, comparativ

Set me five practice tasks on success: five dimensions set off from the diagonal scale cor

Be my SS1 Technical Drawing teacher for this one point: 1. Describe the concept of enlarge

Write a short SS1 Technical Drawing answer about 4. Verify the accuracy of an enlargement

Set me five practice tasks on enlarge and reduce plane figures based on the ratio of areas

I am going to explain 3. Explain why triangles on the same base and between the same paral

Give me a practice set on completing the four standard equal-area constructions on one she

Set me five practice tasks on demonstrating and carry out the construction of plane figure

Show me a worked example on 1. State the principle of tangency and its applications with a

Set me a quick recall test on 3. Construct an arc touching one circle internally and enclo

Be my SS1 Technical Drawing teacher for this one point: 2. Plot the locus of a point on a

Let me talk you through 2. Construct an ellipse by the four-centre, concentric-circles and

Set me a quick recall test on 2. Determine the true length of a line by rotation and by au

Show me a worked example on the meaning of development and its applications with an error

I am revising Orthographic Projection for SS1 Technical Drawing. Test me on 2. Draw and in