296 prompts matching "Drawing a four-bar linkage to given link lengths and set out twelve crank positi"
Spot my mistake: Assuming a polygon constructed on a given side will also fit a given circle
Act as my SS3 Technical Drawing tutor. Write a short answer on assuming a polygon construc
Spot my mistake: Treating an ellipse as a shape struck from four centres rather than plotted as a locus
Act as my SS3 Technical Drawing tutor. Write a short answer on treating an ellipse as a sh
Spot my mistake: Sectioning a shaft, a bolt or a rib along its length
Act as my SS3 Technical Drawing tutor. Write a short answer on sectioning a shaft, a bolt
Spot my mistake: Assuming a line inclined in both views can have its true length measured in either
Act as my SS3 Technical Drawing tutor. Write a short answer on assuming a line inclined in
Let me explain: Compasses, dividers and the protractor
I have just studied compasses, dividers and the protractor in my SS3 Technical Drawing cla
Practice set: Setting up a drawing sheet with border and title block
Act as my SS3 Technical Drawing tutor. Give me five practice questions on setting up a dra
Teach me: Dividing a straight line into equal parts by construction
You are my personal SS3 Technical Drawing tutor. Teach me dividing a straight line into eq
Practice set: Dividing a stated line into seven equal parts
Act as my SS3 Technical Drawing tutor. Give me five practice questions on dividing a state
Practice set: Constructing a diagonal scale to a stated RF
Act as my SS3 Technical Drawing tutor. Give me five practice questions on constructing a d
Practice set: Constructing stated angles without a protractor
Act as my SS3 Technical Drawing tutor. Give me five practice questions on constructing sta
WAEC prep: Constructing a polygon within a given circle
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Let me explain: Internal and external common tangents to two circles
I have just studied internal and external common tangents to two circles in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in:
WAEC prep: Applying tangency to a spanner or anchor outline
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Practice set: Reducing a polygon to two thirds of its area
Act as my SS3 Technical Drawing tutor. Give me five practice questions on reducing a polyg
Let me explain: The angle of inclination of a line to a plane
I have just studied the angle of inclination of a line to a plane in my SS3 Technical Draw
Practice set: Drawing a section and its true shape
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a sectio
Let me explain: Abbreviations used on engineering drawings
I have just studied abbreviations used on engineering drawings in my SS3 Technical Drawing
Spot my mistake: A drawing that misuses a standard symbol
Act as my SS3 Technical Drawing tutor. Write a short answer on a drawing that misuses a st
Practice set: Drawing a bending moment diagram for a cantilever
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a bendin
Practice set: Drawing a section through a roof
Act as my SS3 Technical Drawing tutor. Give me five practice questions on drawing a sectio