Technical Drawing

Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con

I am revising True Shapes I for SS2 Technical Drawing. Test me on determine the true shape

Give me a practice set on modelling-clay cone at four angles in front of the class for SS2

Set me a small project on drawing a 40 mm side hexagonal prism 80 mm high truncated at 35

Take swap sheets and mark each other's work against a three-point checklist out of the tex

Show me a worked example on three products in which a truncated pyramid form is used with

Set me five practice tasks on your model against the drawing, at the level expected in SS2

Set me a small project on drawing two cylinders of 50 mm and 30 mm diameter meeting at 90

Show me a worked example on drawing the lines of intersection of two square prisms meeting

I am going to explain rendering the finished view with tone and texture to distinguish two

Set me five practice tasks on drawing a stepped block in two-point perspective with vanish

Show me a worked example on four line types used in orthographic drawing and the purpose o

Show me a worked example on dimension a drawing using the aligned and the unidirectional s

Set me five practice tasks on fully dimension a given third angle drawing, using at least

Let me talk you through interpreting three orthographic views from the Orthographic Projec

Give me a practice set on modelling one converted solid in clay or card for SS2 Technical

Quiz me on drawing a second auxiliary elevation and a second auxiliary plan of a shaped bl

Show me a worked example on drawing the auxiliary views of a full hexagonal prism and a sq

Give me a practice set on comparing their auxiliary outline of the cone for SS2 Technical

Show me a worked example on drawing the second auxiliary elevation of a shaped block and l