287 prompts matching "Let me explain: 3. Construct isometric arcs and fillets"
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Spot my mistake: Drawing an isometric circle of 40 mm diameter by the four-centre method
Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent
Real-life Nigeria: Constructing an involute of a circle and a cycloid on one A3 sheet
Take constructing an involute of a circle and a cycloid on one A3 sheet out of the textboo
Spot my mistake: Cut, fold and assemble the developments in cardboard
Show me a worked example on cut, fold and assemble the developments in cardboard with an e
Spot my mistake: Suggest, with reasons, a suitable board thickness and folding method for a small retail carton
Show me a worked example on suggest, with reasons, a suitable board thickness and folding
WAEC prep: Why perspective is preferred to isometric for a client presentation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Dimension a drawing using the aligned and the unidirectional system
Show me a worked example on dimension a drawing using the aligned and the unidirectional s
Spot my mistake: Produce, dimension and plot an auxiliary elevation of a truncated solid on A3 at 1:1
Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca
Spot my mistake: The meaning of the horizontal plane, the vertical plane and the reference line XY
Write a short SS2 Technical Drawing answer about the meaning of the horizontal plane, the
Spot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines
Spot my mistake: Constructing a hyperbola from given foci and a constant difference of 30 mm
Give me a wrong or muddled explanation of constructing a hyperbola from given foci and a c
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Assessed AO3, and true shapes of truncated solids are a standing WAEC and NECO question
I am an SS2 student studying True Shapes I in Technical Drawing. Explain assessed AO3, and
WAEC prep: Develop and build in card a truncated cylinder of 50 mm diameter cut at 45 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Real-life Nigeria: Drawing and fully dimension a bracket in third angle projection
Take drawing and fully dimension a bracket in third angle projection out of the textbook.
WAEC prep: Five dimensioning errors on the drawing supplied and correct each
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Add a sectional view on a stated cutting plane, hatched at 45 degrees, and label it A-A
I am an SS2 student studying Orthographic Projection III in Technical Drawing. Explain add
Real-life Nigeria: Converting a given first angle drawing into an isometric view
Show me how converting a given first angle drawing into an isometric view works in real li