283 prompts matching "Success: a correctly named and exported file produced that matches the manual dr"
Let me explain: Assessed AO3, and truncated solids in auxiliary projection are frequent in WAEC and NECO Paper 2
I am going to explain assessed AO3, and truncated solids in auxiliary projection are frequ
Project task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Practice set: Rotating the UCS and setting up a viewport so the auxiliary direction becomes horizontal on
Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire
Spot my mistake: Produce, dimension and plot an auxiliary elevation of a truncated solid on A3 at 1:1
Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca
Spot my mistake: The meaning of the horizontal plane, the vertical plane and the reference line XY
Write a short SS2 Technical Drawing answer about the meaning of the horizontal plane, the
Let me explain: Determine the horizontal trace and vertical trace of a line inclined to both planes
I am going to explain determine the horizontal trace and vertical trace of a line inclined
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
Spot my mistake: Why a line parallel to a plane appears in true length in the view taken on that plane
Show me a worked example on why a line parallel to a plane appears in true length in the v
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
Let me explain: Sketching freehand front, top and side views of two of the same tools
I am going to explain sketching freehand front, top and side views of two of the same tool
Practice set: Practising crating and proportion exercises
Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr
Practice set: Examining photographs of local soils and foundations
Give me a practice set on examining photographs of local soils and foundations for SS2 Tec
Quiz: The parts of a door and of a window: frame
I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part
Let me explain: Drawing to 1:10 the elevation and horizontal section of a casement window
Let me talk you through drawing to 1:10 the elevation and horizontal section of a casement
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
Let me explain: An arch and a reinforced concrete lintel compared
I am going to explain an arch and a reinforced concrete lintel compared to you, as an SS2
Spot my mistake: Drawing a sectional elevation of a dog-leg staircase to 1:50 and label eight parts
Show me a worked example on drawing a sectional elevation of a dog-leg staircase to 1:50 a