228 prompts matching "The assembly drawing and the parts list"
Quiz: 1. Define and distinguish the ellipse, cycloid, trochoid, involute and helix
I am revising Special Curves for SS1 Technical Drawing. Test me on 1. Define and distingui
Let me explain: 2. Construct an ellipse by the four-centre, concentric-circles and parallelogram methods
Let me talk you through 2. Construct an ellipse by the four-centre, concentric-circles and
Teach me: 1. Prepare the pattern development of a prism and of a cylinder
Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development
Quiz: 2. Prepare the development of truncated prisms and cylinders
Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech
Quiz: 2. Draw and interpret the first-angle and third-angle projection symbols
I am revising Orthographic Projection for SS1 Technical Drawing. Test me on 2. Draw and in
Let me explain: 3. Produce the front elevation, end elevation and plan of a given solid in first angle
Let me talk you through 3. Produce the front elevation, end elevation and plan of a given
Teach me: 1. State the rules and conventions of dimensioning
I am an SS1 student studying Methods of Dimensioning in Technical Drawing. Explain 1. Stat
Teach me: 1. Construct isometric squares and rectangles by the box method
You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a
Quiz: 2. Demonstrate the use of shading to enhance an isometric drawing
Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr
Quiz: 3. Construct an oblique drawing using the box method
Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr
Practice set: Cavalier and cabinet oblique of the same block so students can see the halved receding depth.
Give me a practice set on cavalier and cabinet oblique of the same block so students can s
Teach me: 2. Use a graphics package for lettering and for drawing lines and angles
You are my personal SS1 Technical Drawing tutor. Teach me 2. Use a graphics package for le
Quiz: 2. Identify the types of angles: acute, right, obtuse, reflex, complementary and supplementary
Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle
Spot my mistake: 4. Construct any acute angle using the tangent and the sine methods, and bisect a given angle
Give me a wrong or muddled explanation of 4. Construct any acute angle using the tangent a
Spot my mistake: Given two sides and the included angle
Show me a worked example on given two sides and the included angle with an error somewhere
Spot my mistake: Success: all three constructions within 0.5 mm and ±1° of the specified data
Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the
Spot my mistake: Drawing and interpret both projection symbols
Show me a worked example on drawing and interpret both projection symbols with an error so
Spot my mistake: 4. Calculate the interior and exterior angles of any regular polygon
Show me a worked example on 4. Calculate the interior and exterior angles of any regular p
Teach me: 1. Describe the uses of scale in technical drawing
I am an SS1 student studying Scales in Technical Drawing. Explain 1. Describe the uses of
Quiz: 2. Identify the types of scales: plain, diagonal, comparative and vernier
Set me a quick recall test on 2. Identify the types of scales: plain, diagonal, comparativ