287 prompts matching "Drawing a detail at a wall and beam junction"
Real-life Nigeria: Drawing the auxiliary plan of a cylinder 50 mm diameter truncated at 40 degrees
Take drawing the auxiliary plan of a cylinder 50 mm diameter truncated at 40 degrees out o
Spot my mistake: Drawing the auxiliary elevation of a truncated square pyramid on a plane inclined at 50 degrees
Show me a worked example on drawing the auxiliary elevation of a truncated square pyramid
WAEC prep: Measuring and state the major and minor axes of the true shape obtained, in millimetres
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Practice set: Rotating the UCS and setting up a viewport so the auxiliary direction becomes horizontal on
Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire
Project task: Drawing a truncated hexagonal prism, produce its auxiliary elevation
Set me a small project on drawing a truncated hexagonal prism, produce its auxiliary eleva
Real-life Nigeria: Are given a plan and elevation only and must state the position of each point in words
Show me how are given a plan and elevation only and must state the position of each point
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Let me explain: Determine the inclination of the lamina to the horizontal plane from the drawing
Let me talk you through determine the inclination of the lamina to the horizontal plane fr
Teach me: By shape a trowel, plumb bob, spirit level, mason's square, float, bolster and jointer
I am an SS2 student studying Building Tools and Freehand Sketching in Technical Drawing. E
Practice set: Practising crating and proportion exercises
Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr
Let me explain: Drawing to a scale of 1:20 a section through a strip foundation
Act as my study partner. I will teach you drawing to a scale of 1:20 a section through a s
Real-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
Practice set: Examining photographs of local soils and foundations
Give me a practice set on examining photographs of local soils and foundations for SS2 Tec
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation
Show me how comparing louvred, casement and sliding windows for ventilation works in real
Teach me: Semicircular, segmental, flat or camber, pointed and relieving arches
I am an SS2 student studying Openings II: Arches and Lintels in Technical Drawing. Explain
WAEC prep: Why an arch is built with an odd number of voussoirs and a keystone at the crown
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines