287 prompts matching "Drawing a tangent that meets the radius at the point of contact at any convenien"
Practice set: Drawing a stepped block in two-point perspective with vanishing points 300 mm apart
Set me five practice tasks on drawing a stepped block in two-point perspective with vanish
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Spot my mistake: Dimension a drawing using the aligned and the unidirectional system
Show me a worked example on dimension a drawing using the aligned and the unidirectional s
Project task: Enclosing box on the board and removes material step by step so the class sees the isometric
Give me a practical task on enclosing box on the board and removes material step by step s
Spot my mistake: Drawing an isometric circle of 40 mm diameter by the four-centre method
Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent
Spot my mistake: Drawing the auxiliary views of a full hexagonal prism and a square pyramid
Show me a worked example on drawing the auxiliary views of a full hexagonal prism and a sq
Project task: One second auxiliary elevation on the board
Give me a practical task on one second auxiliary elevation on the board from Auxiliary Vie
Practice set: Rotating the UCS and setting up a viewport so the auxiliary direction becomes horizontal on
Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire
Teach me: Determine the true length of a line inclined to both planes by the rotation method
Be my SS2 Technical Drawing teacher for this one point: determine the true length of a lin
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Project task: Cutting their true shape from card, hold it in the model at the stated inclination
Give me a practical task on cutting their true shape from card, hold it in the model at th
Teach me: The classification of foundations as shallow (strip, pad, raft) or deep (pile)
Be my SS2 Technical Drawing teacher for this one point: the classification of foundations
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Teach me: Semicircular, segmental, flat or camber, pointed and relieving arches
I am an SS2 student studying Openings II: Arches and Lintels in Technical Drawing. Explain
Project task: Calculating the number of risers for a 3000 mm rise at 150 mm per riser
Give me a practical task on calculating the number of risers for a 3000 mm rise at 150 mm
Let me explain: The lintel over an opening with the correct bearing and reinforcement indication
Let me talk you through the lintel over an opening with the correct bearing and reinforcem
Spot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines
Practice set: Detail on the board one layer at a time
Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin
Real-life Nigeria: Marking each other's sheets against a five-point checklist
Take marking each other's sheets against a five-point checklist out of the textbook. Descr
Teach me: Drawing the plan of a hipped roof showing hips, valleys and the run of the common rafters
Be my SS2 Technical Drawing teacher for this one point: drawing the plan of a hipped roof