228 prompts matching "Drawing an isometric circle of 40 mm diameter by the four-centre method"
Spot my mistake: 1. State the principle of tangency and its applications
Show me a worked example on 1. State the principle of tangency and its applications with a
Teach me: 2. Construct a tangent to a circle at a point on its circumference and from an external point
You are my personal SS1 Technical Drawing tutor. Teach me 2. Construct a tangent to a circ
WAEC prep: Constructing tangents to a point on a circle and to two equal and unequal circles
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Quiz: 3. Construct an arc touching one circle internally and enclosing the other externally
Set me a quick recall test on 3. Construct an arc touching one circle internally and enclo
Let me explain: 4. Blend arcs and lines smoothly, marking all points of tangency
I am going to explain 4. Blend arcs and lines smoothly, marking all points of tangency to
Spot my mistake: Constructing arcs internally touching, externally enclosing and mixed for two circles
Show me a worked example on constructing arcs internally touching, externally enclosing an
WAEC prep: Success: all blends visually smooth with tangency points marked and radii within 0.5 mm
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Teach me: 2. Plot the locus of a point on a rotating and a sliding mechanism
Be my SS1 Technical Drawing teacher for this one point: 2. Plot the locus of a point on a
Quiz: 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism
Quiz me on 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism, fr
Practice set: Plotting the loci of a point at a fixed distance from a line
Give me a practice set on plotting the loci of a point at a fixed distance from a line for
Spot my mistake: Plotting the path of a point on a crank mechanism
Show me a worked example on plotting the path of a point on a crank mechanism with an erro
Spot my mistake: Consolidation of polygons, scales, enlargement and reduction, equal areas, tangency and loci
Show me a worked example on consolidation of polygons, scales, enlargement and reduction,
Spot my mistake: 3. Construct a cycloid and a trochoid from a rolling circle
Write a short SS1 Technical Drawing answer about 3. Construct a cycloid and a trochoid fro
Project task: Concentric-circles method for an ellipse step by step. Students construct an ellipse by all
Give me a practical task on concentric-circles method for an ellipse step by step. Student
Spot my mistake: The meaning of the special curves
Show me a worked example on the meaning of the special curves with an error somewhere in i
Let me explain: 3. Determine true lengths of the edges of full and truncated solids
I am going to explain 3. Determine true lengths of the edges of full and truncated solids
Real-life Nigeria: Rotation method for finding the true length of a slant edge. Students determine true lengths
Show me how rotation method for finding the true length of a slant edge. Students determin
Spot my mistake: The meaning of development and its applications
Show me a worked example on the meaning of development and its applications with an error
Teach me: 1. Prepare the pattern development of a prism and of a cylinder
Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development
Quiz: 2. Prepare the development of truncated prisms and cylinders
Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech