Technical Drawing

I am an SS1 student studying Examination in Technical Drawing. Explain formal end-of-year

Quiz me on 2. Identify hazards in the drawing studio, from the SS1 Technical Drawing topic

Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Show me a worked example on 2. State the properties of each type of quadrilateral with an

Set me five practice tasks on the types of quadrilaterals with their properties, at the le

Give me a wrong or muddled explanation of formal assessment of the first term programme of

Show me a worked example on 4. Calculate the interior and exterior angles of any regular p

Set me a quick recall test on 2. Identify the types of scales: plain, diagonal, comparativ

Set me five practice tasks on success: five dimensions set off from the diagonal scale cor

Show me a worked example on calculating the linear ratio from a given area ratio with an e

Set me five practice tasks on enlarge and reduce plane figures based on the ratio of areas

Show me a worked example on success: every corresponding side within 1% of the calculated

Set me a quick recall test on 2. State the principles of converting the shape of a plane f

Set me five practice tasks on demonstrating and carry out the construction of plane figure

Show me a worked example on 1. State the principle of tangency and its applications with a

Set me a small project on that the tangent is perpendicular to the radius at the point of

Set me five practice tasks on the meaning of a locus and plot the loci of a point in named

Show me a worked example on plotting the path of a point on a crank mechanism with an erro