287 prompts matching "Let me explain: 1. State the purpose of drawing standards"
Let me explain: Assessed AO3, and intersecting cylinders appear in WAEC and NECO Paper 2
I am going to explain assessed AO3, and intersecting cylinders appear in WAEC and NECO Pap
Spot my mistake: Three uses of perspective drawing and distinguish it from isometric and oblique drawing
Show me a worked example on three uses of perspective drawing and distinguish it from isom
Real-life Nigeria: Visual ray method, drawing rays from the station point through each plan corner to the picture
Take visual ray method, drawing rays from the station point through each plan corner to th
Spot my mistake: Dimension a drawing using the aligned and the unidirectional system
Show me a worked example on dimension a drawing using the aligned and the unidirectional s
Let me explain: Interpreting three orthographic views
Let me talk you through interpreting three orthographic views from the Orthographic Projec
WAEC prep: Drawing the auxiliary plan of a 60 mm high cone on a plane inclined at 45 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Obtain the true shape of the cut face from the auxiliary view
I am an SS2 student studying Auxiliary Views III in Technical Drawing. Explain obtain the
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Real-life Nigeria: Are given a plan and elevation only and must state the position of each point in words
Show me how are given a plan and elevation only and must state the position of each point
Real-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
Spot my mistake: The meaning of an opening in a building
Show me a worked example on the meaning of an opening in a building with an error somewher
Quiz: The parts of a door and of a window: frame
I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part
Quiz: On the same detail the damp-proof course
I am revising Building Details I for SS2 Technical Drawing. Test me on the same detail the
Spot my mistake: Why the damp-proof course must be continuous with the damp-proof membrane under the floor
Show me a worked example on why the damp-proof course must be continuous with the damp-pro
Teach me: What is meant by the true shape of a cut surface
You are my personal SS2 Technical Drawing tutor. Teach me what is meant by the true shape
Real-life Nigeria: Measuring the major and minor axes of their ellipse
Show me how measuring the major and minor axes of their ellipse works in real life in Nige
Teach me: The finished models for accuracy of joints
You are my personal SS2 Technical Drawing tutor. Teach me the finished models for accuracy
Project task: Set out the development of their Week 6 truncated cone on card
Give me a practical task on set out the development of their Week 6 truncated cone on card
Project task: Drawing two cylinders of 50 mm and 30 mm diameter meeting at 90 degrees
Set me a small project on drawing two cylinders of 50 mm and 30 mm diameter meeting at 90
Teach me: Determine the lines of intersection of two regular pyramids
Be my SS2 Technical Drawing teacher for this one point: determine the lines of intersectio