296 prompts matching "Measuring openings in the school buildings"
Let me explain: Drawing an isometric circle by the four-centre method
I have just studied drawing an isometric circle by the four-centre method in my SS3 Technical Drawing class. Let me explain it back to you in my own words, then tell me plainly what I got wrong or left out. Ask me one follow-up question afterwards to test whether I really understood it.
launch and paste in:
WAEC prep: Non-isometric lines and how they are plotted
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Quiz: Choosing the face to place parallel to the plane
Act as my SS3 Technical Drawing tutor and quiz me on choosing the face to place parallel t
WAEC prep: The advantages and limits of oblique drawing
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Teach me: The horizon line, vanishing point and station point
You are my personal SS3 Technical Drawing tutor. Teach me the horizon line, vanishing poin
Teach me: How the object sits relative to the planes in first angle
You are my personal SS3 Technical Drawing tutor. Teach me how the object sits relative to
Teach me: How the planes lie between viewer and object in third angle
You are my personal SS3 Technical Drawing tutor. Teach me how the planes lie between viewe
Quiz: The position of views in third angle
Act as my SS3 Technical Drawing tutor and quiz me on the position of views in third angle.
Spot my mistake: Views arranged in the wrong angle of projection
Act as my SS3 Technical Drawing tutor. Write a short answer on views arranged in the wrong
WAEC prep: The angle a line makes with the horizontal plane
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Let me explain: The line of intersection of two planes
I have just studied the line of intersection of two planes in my SS3 Technical Drawing cla
WAEC prep: The angle between two intersecting planes
Act as a WAEC/NECO Technical Drawing examiner. I am in SS 3. Set me five exam-style questi
Practice set: Finding the intersection of two given planes
Act as my SS3 Technical Drawing tutor. Give me five practice questions on finding the inte
Let me explain: Developing the surface of a frustum
I have just studied developing the surface of a frustum in my SS3 Technical Drawing class.
Teach me: What the centre of gravity of a lamina means
You are my personal SS3 Technical Drawing tutor. Teach me what the centre of gravity of a
Let me explain: Finding the centroid of a composite figure
I have just studied finding the centroid of a composite figure in my SS3 Technical Drawing
Practice set: Locating the centre of gravity of a given lamina
Act as my SS3 Technical Drawing tutor. Give me five practice questions on locating the cen
Spot my mistake: Reading the representative fraction as the ratio of the drawing to the sheet rather than to the object
Act as my SS3 Technical Drawing tutor. Write a short answer on reading the representative
Spot my mistake: Treating a chord and a diameter as interchangeable when finding the centre of an arc
Act as my SS3 Technical Drawing tutor. Write a short answer on treating a chord and a diam
Spot my mistake: Drawing a tangent that meets the radius at the point of contact at any convenient angle
Act as my SS3 Technical Drawing tutor. Write a short answer on drawing a tangent that meet