262 prompts matching "4. Construct a simple isometric drawing of a rectangular solid from given dimens"
Let me explain: The effect on the finished view of moving the station point
Let me talk you through the effect on the finished view of moving the station point from t
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Project task: Enclosing box on the board and removes material step by step so the class sees the isometric
Give me a practical task on enclosing box on the board and removes material step by step s
Spot my mistake: Set up an AutoCAD drawing: units, limits
Give me a wrong or muddled explanation of set up an AutoCAD drawing: units, limits from th
Project task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Teach me: Determine the true length of a line inclined to both planes by the rotation method
Be my SS2 Technical Drawing teacher for this one point: determine the true length of a lin
Quiz: Determine the true length of the same line by the auxiliary plane method
Quiz me on determine the true length of the same line by the auxiliary plane method, from
Teach me: The classification of foundations as shallow (strip, pad, raft) or deep (pile)
Be my SS2 Technical Drawing teacher for this one point: the classification of foundations
Teach me: Tread, riser, going, nosing, string, newel post, baluster, handrail, landing and soffit
Be my SS2 Technical Drawing teacher for this one point: tread, riser, going, nosing, strin
Project task: Calculating the number of risers for a 3000 mm rise at 150 mm per riser
Give me a practical task on calculating the number of risers for a 3000 mm rise at 150 mm
Quiz: Assessed AO2, and roof types and members recur in WAEC and NECO
Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T
Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used
Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me
Real-life Nigeria: Building a simple card or straw truss, load it at the apex
Show me how building a simple card or straw truss, load it at the apex works in real life
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Spot my mistake: Three applications of special curves in engineering
Write a short SS2 Technical Drawing answer about three applications of special curves in e
Practice set: Point equidistant from two fixed points
Give me a practice set on point equidistant from two fixed points for SS2 Technical Drawin
Let me explain: Constructing a parabola inside a given rectangle 100 mm by 60 mm by the intersecting-lines
I am going to explain constructing a parabola inside a given rectangle 100 mm by 60 mm by
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Constructing an epicycloid and a hypocycloid on a stated directing circle
You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a
Spot my mistake: Clockwise and anticlockwise motion and rotary from oscillating
Write a short SS2 Technical Drawing answer about clockwise and anticlockwise motion and ro