228 prompts matching "Drawing the plan and elevation of a 60 mm diameter"
Project task: That the tangent is perpendicular to the radius at the point of contact. Students construct
Set me a small project on that the tangent is perpendicular to the radius at the point of
WAEC prep: Success: all blends visually smooth with tangency points marked and radii within 0.5 mm
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Practice set: Plotting the loci of a point at a fixed distance from a line
Give me a practice set on plotting the loci of a point at a fixed distance from a line for
Spot my mistake: Plotting the path of a point on a crank mechanism
Show me a worked example on plotting the path of a point on a crank mechanism with an erro
Spot my mistake: The meaning of the special curves
Show me a worked example on the meaning of the special curves with an error somewhere in i
Real-life Nigeria: Rotation method for finding the true length of a slant edge. Students determine true lengths
Show me how rotation method for finding the true length of a slant edge. Students determin
Practice set: Success: both folded models close with a gap of less than 2 mm
Set me five practice tasks on success: both folded models close with a gap of less than 2
Spot my mistake: 4. Distinguish chain, parallel and running dimensioning and select the appropriate system
Give me a wrong or muddled explanation of 4. Distinguish chain, parallel and running dimen
Spot my mistake: 4. Construct a simple isometric drawing of a rectangular solid from given dimensions
Show me a worked example on 4. Construct a simple isometric drawing of a rectangular solid
Teach me: 1. Construct isometric squares and rectangles by the box method
You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a
Teach me: 2. Use a graphics package for lettering and for drawing lines and angles
You are my personal SS1 Technical Drawing tutor. Teach me 2. Use a graphics package for le
Quiz: 3. Use a graphics package to produce plane and pictorial figures
I am revising Introduction to Computer Graphics and Cad for SS1 Technical Drawing. Test me
Quiz: 2. Distinguish between drawing materials and drawing instruments
I am revising Drawing Materials and Equipment for SS1 Technical Drawing. Test me on 2. Dis
Practice set: And names each item in a full drawing set
Give me a practice set on and names each item in a full drawing set for SS1 Technical Draw
Quiz: 2. Identify hazards in the drawing studio
Quiz me on 2. Identify hazards in the drawing studio, from the SS1 Technical Drawing topic
Spot my mistake: Given two sides and the included angle
Show me a worked example on given two sides and the included angle with an error somewhere
Quiz: 4. Construct a triangle equal in area to a given quadrilateral and locate the centroid
I am revising Angles and Triangles II for SS1 Technical Drawing. Test me on 4. Construct a
Practice set: Success: all ten circle parts correctly labelled and spacings accurate to 0.5 mm
Set me five practice tasks on success: all ten circle parts correctly labelled and spacing
Practice set: The types of quadrilaterals with their properties
Set me five practice tasks on the types of quadrilaterals with their properties, at the le
Teach me: 3. Interpret and apply the first-angle and third-angle projection symbols
I am an SS1 student studying Drawing Standards and Conventions in Technical Drawing. Expla