287 prompts matching "Let me explain: 3. Construct isometric arcs and fillets"
Real-life Nigeria: Real building tools, names each and passes them round so students feel proportion
Show me how real building tools, names each and passes them round so students feel proport
Spot my mistake: The meaning of a foundation and a floor
Give me a wrong or muddled explanation of the meaning of a foundation and a floor from the
Teach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding
You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl
Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation
Show me how comparing louvred, casement and sliding windows for ventilation works in real
Quiz: Set out a segmental arch geometrically and mark voussoir joints radiating to the centre
Set me a quick recall test on set out a segmental arch geometrically and mark voussoir joi
Teach me: Tread, riser, going, nosing, string, newel post, baluster, handrail, landing and soffit
Be my SS2 Technical Drawing teacher for this one point: tread, riser, going, nosing, strin
Quiz: Straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral staircases
Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral
Spot my mistake: Drawing a king post truss of 6 m span to a scale of 1:20 and label eight members
Give me a wrong or muddled explanation of drawing a king post truss of 6 m span to a scale
Teach me: Drawing the plan of a hipped roof showing hips, valleys and the run of the common rafters
Be my SS2 Technical Drawing teacher for this one point: drawing the plan of a hipped roof
Quiz: Assessed AO2, and roof types and members recur in WAEC and NECO
Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T
Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used
Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me
Spot my mistake: Constructing orthographic views of a truncated solid in AutoCAD
Show me a worked example on constructing orthographic views of a truncated solid in AutoCA
Quiz: Assessed AO2 and AO3
I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse
Spot my mistake: Clockwise and anticlockwise motion and rotary from oscillating
Write a short SS2 Technical Drawing answer about clockwise and anticlockwise motion and ro
Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another
Show me a worked example on why the cut face appears as a straight line in one view and an
Spot my mistake: Determine the curve of intersection of two cylinders of equal diameter meeting at 90 degrees
Write a short SS2 Technical Drawing answer about determine the curve of intersection of tw
Practice set: Paper tube into a slot cut in a larger tube to show the saddle curve before the construction is
Give me a practice set on paper tube into a slot cut in a larger tube to show the saddle c
Spot my mistake: Drawing the lines of intersection of two square prisms meeting at 90 degrees
Show me a worked example on drawing the lines of intersection of two square prisms meeting
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Spot my mistake: Four rules of dimensioning
Show me a worked example on four rules of dimensioning with an error somewhere in it. Do n