287 prompts matching "Let me explain: Setting up a two-point perspective"
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
WAEC prep: Four advantages and two limitations of CAD compared with drawing-board work
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Produce, dimension and plot an auxiliary elevation of a truncated solid on A3 at 1:1
Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca
Spot my mistake: The meaning of the horizontal plane, the vertical plane and the reference line XY
Write a short SS2 Technical Drawing answer about the meaning of the horizontal plane, the
Practice set: Two planes from two sheets of card at right angles
Give me a practice set on two planes from two sheets of card at right angles for SS2 Techn
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
Spot my mistake: The meaning of an opening in a building
Show me a worked example on the meaning of an opening in a building with an error somewher
Spot my mistake: The meaning of an arch
Write a short SS2 Technical Drawing answer about the meaning of an arch that contains thre
Practice set: Compression in an arch by building a small arch of wooden blocks over a former
Give me a practice set on compression in an arch by building a small arch of wooden blocks
Spot my mistake: Annotate every material with leader lines and complete the sheet with a title block and scale
Write a short SS2 Technical Drawing answer about annotate every material with leader lines
Practice set: Detail on the board one layer at a time
Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin
Real-life Nigeria: Marking each other's sheets against a five-point checklist
Take marking each other's sheets against a five-point checklist out of the textbook. Descr
Spot my mistake: Why the damp-proof course must be continuous with the damp-proof membrane under the floor
Show me a worked example on why the damp-proof course must be continuous with the damp-pro
Practice set: Tension and compression members on a board sketch of a king post truss
Give me a practice set on tension and compression members on a board sketch of a king post
Practice set: Sketching the locus of a point on the rim of a wheel rolling along a straight road
Set me five practice tasks on sketching the locus of a point on the rim of a wheel rolling
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: The working of a simple link mechanism
I am an SS2 student studying Link Mechanisms I in Technical Drawing. Explain the working o
Real-life Nigeria: Checking each other's stroke measurement against the calculated value of twice the crank radius
Take checking each other's stroke measurement against the calculated value of twice the cr
Teach me: Assessed AO3, and true shapes of truncated solids are a standing WAEC and NECO question
I am an SS2 student studying True Shapes I in Technical Drawing. Explain assessed AO3, and
WAEC prep: Determine the true shape of the cut face of a 50 mm diameter cylinder truncated at 30 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o