201 prompts matching "Quiz: 4. Apply standard conventions for scale statement"
Spot my mistake: Here the locus plot supplies the evidence
Show me a worked example on here the locus plot supplies the evidence with an error somewh
Project task: Twelve-position method on the board, stressing that each crank position gives one new position
Set me a small project on twelve-position method on the board, stressing that each crank p
Practice set: Calculating the stroke of a slider-crank whose crank radius is 30 mm
Set me five practice tasks on calculating the stroke of a slider-crank whose crank radius
Spot my mistake: What happens to the output at a dead-centre position
Show me a worked example on what happens to the output at a dead-centre position with an e
Teach me: What is meant by the true shape of a cut surface
You are my personal SS2 Technical Drawing tutor. Teach me what is meant by the true shape
Teach me: Assessed AO3, and true shapes of truncated solids are a standing WAEC and NECO question
I am an SS2 student studying True Shapes I in Technical Drawing. Explain assessed AO3, and
Practice set: Modelling-clay cone at four angles in front of the class
Give me a practice set on modelling-clay cone at four angles in front of the class for SS2
WAEC prep: Determine the true shape of the cut face of a 50 mm diameter cylinder truncated at 30 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: The four conic sections and the cutting plane that produces each
Set me five practice tasks on the four conic sections and the cutting plane that produces
Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another
Show me a worked example on why the cut face appears as a straight line in one view and an
Teach me: The true shape obtained with the shape shown in the plan, compared
Be my SS2 Technical Drawing teacher for this one point: the true shape obtained with the s
Practice set: One truncated hexagonal prism on the board
Give me a practice set on one truncated hexagonal prism on the board for SS2 Technical Dra
Project task: Drawing a 40 mm side hexagonal prism 80 mm high truncated at 35 degrees
Set me a small project on drawing a 40 mm side hexagonal prism 80 mm high truncated at 35
WAEC prep: Drawing the true shape of the cut face of a square pyramid of 50 mm base truncated at 40
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Labelling the cutting plane, viewing arrows
Set me five practice tasks on labelling the cutting plane, viewing arrows, at the level ex
Spot my mistake: Cut, fold and assemble the developments in cardboard
Show me a worked example on cut, fold and assemble the developments in cardboard with an e
Practice set: Cutting paper cylinder to show that the seam edge of the development is the stretch-out
Give me a practice set on cutting paper cylinder to show that the seam edge of the develop
WAEC prep: Develop and build in card a truncated cylinder of 50 mm diameter cut at 45 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Your model against the drawing
Set me five practice tasks on your model against the drawing, at the level expected in SS2
Teach me: Determine the curve of intersection of two cylinders of unequal diameter
I am an SS2 student studying Intersection of Solids I in Technical Drawing. Explain determ