225 prompts matching "Quiz: Bow's notation and how forces are lettered"
Teach me: 2. Construct a tangent to a circle at a point on its circumference and from an external point
You are my personal SS1 Technical Drawing tutor. Teach me 2. Construct a tangent to a circ
WAEC prep: Constructing tangents to a point on a circle and to two equal and unequal circles
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: Constructing arcs internally touching, externally enclosing and mixed for two circles
Show me a worked example on constructing arcs internally touching, externally enclosing an
WAEC prep: Success: all blends visually smooth with tangency points marked and radii within 0.5 mm
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Practice set: Construction accuracy reported separately to parents
Set me five practice tasks on construction accuracy reported separately to parents, at the
Spot my mistake: 3. Construct a cycloid and a trochoid from a rolling circle
Write a short SS1 Technical Drawing answer about 3. Construct a cycloid and a trochoid fro
WAEC prep: Constructing an ellipse by three methods and a cycloid
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: The meaning of development and its applications
Show me a worked example on the meaning of development and its applications with an error
WAEC prep: Preparing pyramid and cone developments
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: 4. Produce models of geometrical solids from their developments and evaluate accuracy
Show me a worked example on 4. Produce models of geometrical solids from their development
Spot my mistake: Preparing developments of prisms and cylinders and develop models of geometrical solids
Show me a worked example on preparing developments of prisms and cylinders and develop mod
Teach me: 1. Explain orthographic projection and distinguish first-angle from third-angle projection
You are my personal SS1 Technical Drawing tutor. Teach me 1. Explain orthographic projecti
Spot my mistake: 4. Interpret a three-view orthographic drawing and sketch the solid it represents
Write a short SS1 Technical Drawing answer about 4. Interpret a three-view orthographic dr
WAEC prep: Perspective and shading in isometric drawing
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Quiz: 3. Construct an oblique drawing using the box method
Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr
Practice set: Cavalier and cabinet oblique of the same block so students can see the halved receding depth.
Give me a practice set on cavalier and cabinet oblique of the same block so students can s
WAEC prep: Constructing oblique drawings by the box and centre-layout methods
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Teach me: 2. Use a graphics package for lettering and for drawing lines and angles
You are my personal SS1 Technical Drawing tutor. Teach me 2. Use a graphics package for le
Spot my mistake: Success: a correctly named and exported file produced that matches the manual drawing
Show me a worked example on success: a correctly named and exported file produced that mat
Spot my mistake: 4. Produce single-stroke vertical and inclined Gothic letters
Give me a wrong or muddled explanation of 4. Produce single-stroke vertical and inclined G