283 prompts matching "Quiz: Bow's notation and how forces are lettered"
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Practice set: Rotating the UCS and setting up a viewport so the auxiliary direction becomes horizontal on
Give me a practice set on rotating the UCS and setting up a viewport so the auxiliary dire
Spot my mistake: Produce, dimension and plot an auxiliary elevation of a truncated solid on A3 at 1:1
Show me a worked example on produce, dimension and plot an auxiliary elevation of a trunca
WAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: The meaning of the horizontal plane, the vertical plane and the reference line XY
Write a short SS2 Technical Drawing answer about the meaning of the horizontal plane, the
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Determine the true length of the same line by the auxiliary plane method
Quiz me on determine the true length of the same line by the auxiliary plane method, from
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
WAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Real building tools, names each and passes them round so students feel proportion
Show me how real building tools, names each and passes them round so students feel proport
Practice set: Practising crating and proportion exercises
Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr
Quiz: The classification of floors as solid or suspended
Quiz me on the classification of floors as solid or suspended, from the SS2 Technical Draw
Practice set: Examining photographs of local soils and foundations
Give me a practice set on examining photographs of local soils and foundations for SS2 Tec
Teach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding
You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation
Show me how comparing louvred, casement and sliding windows for ventilation works in real
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
WAEC prep: Drawing to 1:10 the elevation of a casement window and label six parts
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o