280 prompts matching "Quiz: Developing the surface of a prism"
Spot my mistake: Drawing the auxiliary elevation of a truncated square pyramid on a plane inclined at 50 degrees
Show me a worked example on drawing the auxiliary elevation of a truncated square pyramid
WAEC prep: Measuring and state the major and minor axes of the true shape obtained, in millimetres
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Producing a one-point perspective of the block
Act as my study partner. I will teach you producing a one-point perspective of the block i
Project task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Real-life Nigeria: Time the CAD version against the board version of the same block from Week 5
Show me how time the CAD version against the board version of the same block from Week 5 w
WAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: The meaning of the horizontal plane, the vertical plane and the reference line XY
Write a short SS2 Technical Drawing answer about the meaning of the horizontal plane, the
Quiz: Locate points at stated distances above the HP
Set me a quick recall test on locate points at stated distances above the HP at SS2 level.
Let me explain: Determine the horizontal trace and vertical trace of a line inclined to both planes
I am going to explain determine the horizontal trace and vertical trace of a line inclined
Real-life Nigeria: Are given a plan and elevation only and must state the position of each point in words
Show me how are given a plan and elevation only and must state the position of each point
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Determine the true length of a line inclined to both planes by the rotation method
Be my SS2 Technical Drawing teacher for this one point: determine the true length of a lin
Let me explain: Determine the true inclination of the line to the horizontal plane and to the vertical plane
Act as my study partner. I will teach you determine the true inclination of the line to th
WAEC prep: Calculating the true length of a line whose plan is 60 mm
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Drawing the traces of a plane inclined to both principal planes
You are my personal SS2 Technical Drawing tutor. Teach me drawing the traces of a plane in
Let me explain: Determine the inclination of the lamina to the horizontal plane from the drawing
Let me talk you through determine the inclination of the lamina to the horizontal plane fr
Spot my mistake: The angle of inclination of the lamina to the horizontal plane to the nearest degree
Show me a worked example on the angle of inclination of the lamina to the horizontal plane
WAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Sketching freehand pictorial views of four selected tools in correct proportion
Set me a quick recall test on sketching freehand pictorial views of four selected tools in