287 prompts matching "4. Interpret a three-view orthographic drawing and sketch the solid it represent"
Real-life Nigeria: Comparing the CAD auxiliary with their Week 8 board drawing
Take comparing the CAD auxiliary with their Week 8 board drawing out of the textbook. Desc
Let me explain: Determine the horizontal trace and vertical trace of a line inclined to both planes
I am going to explain determine the horizontal trace and vertical trace of a line inclined
Real-life Nigeria: Are given a plan and elevation only and must state the position of each point in words
Show me how are given a plan and elevation only and must state the position of each point
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Why a line parallel to a plane appears in true length in the view taken on that plane
Show me a worked example on why a line parallel to a plane appears in true length in the v
Practice set: Rod at an angle to both card planes and rotates it into a position parallel to the VP so the
Give me a practice set on rod at an angle to both card planes and rotates it into a positi
Practice set: The term foreshortening with a sketched example
Set me five practice tasks on the term foreshortening with a sketched example, at the leve
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
WAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
Quiz: The parts of a door and of a window: frame
I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
WAEC prep: Why an arch is built with an odd number of voussoirs and a keystone at the crown
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: The lintel over an opening with the correct bearing and reinforcement indication
Let me talk you through the lintel over an opening with the correct bearing and reinforcem
Teach me: Assessed AO3, and detailed building drawing is a standing WAEC and NECO question
I am an SS2 student studying Building Details I in Technical Drawing. Explain assessed AO3
Project task: Drawing the full detail to 1:10 on A3, annotate every layer
Set me a small project on drawing the full detail to 1:10 on A3, annotate every layer, the
Spot my mistake: Drawing a king post truss of 6 m span to a scale of 1:20 and label eight members
Give me a wrong or muddled explanation of drawing a king post truss of 6 m span to a scale
Quiz: Constructing a parabola by the focus and directrix method for an eccentricity of 1
Set me a quick recall test on constructing a parabola by the focus and directrix method fo
Let me explain: Constructing the involute of a square and of a regular hexagon of 30 mm side
Act as my study partner. I will teach you constructing the involute of a square and of a r
Practice set: The four conic sections and the cutting plane that produces each
Set me five practice tasks on the four conic sections and the cutting plane that produces