Use AI with an adult nearby, and check answers together.

Senior Secondary

Technical Drawing

AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →
Three prompts in each subject are free to try. One subscription opens every subject and every prompt in senior secondary, or subscribe your whole school. Already have a code? Enter it here.
Clear

287 prompts matching "Constructing circles in contact with one another"

Teach me: Drawing the traces of a plane inclined to both principal planes

You are my personal SS2 Technical Drawing tutor. Teach me drawing the traces of a plane in

Quiz: Determine the true shape of a triangular lamina inclined to both planes

I am revising Planes and Views in Space for SS2 Technical Drawing. Test me on determine th

Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on

Give me a practice set on card triangle in the two-plane model and turns it until the clas

Spot my mistake: The angle of inclination of the lamina to the horizontal plane to the nearest degree

Show me a worked example on the angle of inclination of the lamina to the horizontal plane

Practice set: Practising crating and proportion exercises

Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr

Practice set: Examining photographs of local soils and foundations

Give me a practice set on examining photographs of local soils and foundations for SS2 Tec

Spot my mistake: The meaning of an opening in a building

Show me a worked example on the meaning of an opening in a building with an error somewher

Teach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding

You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl

Quiz: The parts of a door and of a window: frame

I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part

Spot my mistake: Five types of door and five types of window

Show me a worked example on five types of door and five types of window with an error some

Practice set: Compression in an arch by building a small arch of wooden blocks over a former

Give me a practice set on compression in an arch by building a small arch of wooden blocks

Spot my mistake: Seven parts of an arch on a given drawing

Show me a worked example on seven parts of an arch on a given drawing with an error somewh

Teach me: Tread, riser, going, nosing, string, newel post, baluster, handrail, landing and soffit

Be my SS2 Technical Drawing teacher for this one point: tread, riser, going, nosing, strin

Spot my mistake: Assessed AO2, with a calculation shown

Show me a worked example on assessed AO2, with a calculation shown with an error somewhere

Spot my mistake: Drawing a sectional elevation of a dog-leg staircase to 1:50 and label eight parts

Show me a worked example on drawing a sectional elevation of a dog-leg staircase to 1:50 a

Teach me: Preparing to 1:10 a detailed vertical section through a strip foundation

You are my personal SS2 Technical Drawing tutor. Teach me preparing to 1:10 a detailed ver

Practice set: Detail on the board one layer at a time

Give me a practice set on detail on the board one layer at a time for SS2 Technical Drawin

Teach me: Drawing the plan of a hipped roof showing hips, valleys and the run of the common rafters

Be my SS2 Technical Drawing teacher for this one point: drawing the plan of a hipped roof

Practice set: Tension and compression members on a board sketch of a king post truss

Give me a practice set on tension and compression members on a board sketch of a king post

Spot my mistake: Three applications of special curves in engineering

Write a short SS2 Technical Drawing answer about three applications of special curves in e

© 2026 PromptPaddi Limited. All rights reserved.