228 prompts matching "Let me explain: The arrangement of views in third angle"
Practice set: Producing a composite isometric drawing from orthographic views
Set me five practice tasks on producing a composite isometric drawing from orthographic vi
WAEC prep: Constructing oblique drawings by the box and centre-layout methods
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Teach me: 2. Use a graphics package for lettering and for drawing lines and angles
You are my personal SS1 Technical Drawing tutor. Teach me 2. Use a graphics package for le
Teach me: 1. Construct a regular polygon using the square (general) method
You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct a regular polygon u
Quiz: 2. Define isometric drawing and the isometric axes at 30° to the horizontal
Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr
Quiz: 3. Construct an oblique drawing using the box method
Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr
Spot my mistake: 2. State the properties of each type of quadrilateral
Show me a worked example on 2. State the properties of each type of quadrilateral with an
Spot my mistake: 1. Construct an arc of given radius internally touching two circles
Write a short SS1 Technical Drawing answer about 1. Construct an arc of given radius inter
Teach me: 1. Arrange an appropriate working area before starting a drawing
I am an SS1 student studying Board Practice: Title Block and Lettering in Technical Drawin
Spot my mistake: 4. Produce single-stroke vertical and inclined Gothic letters
Give me a wrong or muddled explanation of 4. Produce single-stroke vertical and inclined G
Project task: Layout of a title block on the board with proportions marked. Students draw a border
Give me a practical task on layout of a title block on the board with proportions marked.
Practice set: Each construction step by step on the board. Students construct the full set of special angles
Give me a practice set on each construction step by step on the board. Students construct
Spot my mistake: Given two sides and the included angle
Show me a worked example on given two sides and the included angle with an error somewhere
WAEC prep: The classification of triangles by side and by angle
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Real-life Nigeria: Drawing a large circle and label all named parts
Take drawing a large circle and label all named parts out of the textbook. Describe a real
Spot my mistake: 2. Identify standard line types and their applications as set out in the drawing standard
Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their
Spot my mistake: 4. Compare the three methods for accuracy
Write a short SS1 Technical Drawing answer about 4. Compare the three methods for accuracy
Spot my mistake: Calculating the linear ratio from a given area ratio
Show me a worked example on calculating the linear ratio from a given area ratio with an e
Spot my mistake: Success: calculated areas of original and converted figures agree within 2%
Show me a worked example on success: calculated areas of original and converted figures ag
Spot my mistake: Consolidation of polygons, scales, enlargement and reduction, equal areas, tangency and loci
Show me a worked example on consolidation of polygons, scales, enlargement and reduction,