287 prompts matching "The symbols for diameter, radius and square"
Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used
Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me
Teach me: The term locus
You are my personal SS2 Technical Drawing tutor. Teach me the term locus, as it is taught
Practice set: Sketching the locus of a point on the rim of a wheel rolling along a straight road
Set me five practice tasks on sketching the locus of a point on the rim of a wheel rolling
Practice set: Describe, with an annotated sketch, one product whose form follows a parabola
Set me five practice tasks on describe, with an annotated sketch, one product whose form f
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Teach me: Constructing an epicycloid and a hypocycloid on a stated directing circle
You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a
Quiz: Assessed AO2 and AO3
I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse
Practice set: Lay a plastic gear or bicycle sprocket over their finished involute
Give me a practice set on lay a plastic gear or bicycle sprocket over their finished invol
Spot my mistake: The motion at the needle of a treadle sewing machine when the treadle oscillates
Show me a worked example on the motion at the needle of a treadle sewing machine when the
Teach me: Plotting the locus of a stated point on the coupler of the four-bar chain
Be my SS2 Technical Drawing teacher for this one point: plotting the locus of a stated poi
Spot my mistake: Here the locus plot supplies the evidence
Show me a worked example on here the locus plot supplies the evidence with an error somewh
Project task: Twelve-position method on the board, stressing that each crank position gives one new position
Set me a small project on twelve-position method on the board, stressing that each crank p
Spot my mistake: What happens to the output at a dead-centre position
Show me a worked example on what happens to the output at a dead-centre position with an e
Teach me: What is meant by the true shape of a cut surface
You are my personal SS2 Technical Drawing tutor. Teach me what is meant by the true shape
Quiz: Determine the true shape of a right cone truncated at 45 degrees to the axis
I am revising True Shapes I for SS2 Technical Drawing. Test me on determine the true shape
Teach me: Assessed AO3, and true shapes of truncated solids are a standing WAEC and NECO question
I am an SS2 student studying True Shapes I in Technical Drawing. Explain assessed AO3, and
Practice set: Modelling-clay cone at four angles in front of the class
Give me a practice set on modelling-clay cone at four angles in front of the class for SS2
Teach me: The true shape obtained with the shape shown in the plan, compared
Be my SS2 Technical Drawing teacher for this one point: the true shape obtained with the s
Practice set: One truncated hexagonal prism on the board
Give me a practice set on one truncated hexagonal prism on the board for SS2 Technical Dra
Practice set: Labelling the cutting plane, viewing arrows
Set me five practice tasks on labelling the cutting plane, viewing arrows, at the level ex