Technical Drawing

Set me five practice tasks on convert given orthographic views into an isometric view draw

Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent

Set me a small project on block with an inclined face against a card plane, the kind I cou

Take drawing a first auxiliary elevation and a first auxiliary plan of a shaped block on o

Let me talk you through drawing the auxiliary elevation and auxiliary plan of a truncated

Show me a worked example on drawing the auxiliary elevation of a truncated square pyramid

Be my SS2 Technical Drawing teacher for this one point: producing an isometric drawing of

Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from

Show me a worked example on constructing orthographic views of a truncated solid in AutoCA

Take comparing the CAD auxiliary with their Week 8 board drawing out of the textbook. Desc

Set me five practice tasks on CAD against manual drawing for this task, at the level expec

Give me a practical task on plotting six points at given distances above the HP from Trace

Show me a worked example on solving five given lines for true length with an error somewhe

Give me a practical task on cutting their true shape from card, hold it in the model at th

Show me a worked example on the angle of inclination of the lamina to the horizontal plane

Show me a worked example on the function of a plumb bob with an error somewhere in it. Do

Take lesson with the load path from roof to soil, drawing it as arrows on a board section

Show me a worked example on the meaning of an opening in a building with an error somewher

Let me talk you through drawing to 1:10 the elevation and horizontal section of a casement

Give me a practical task on parts on a real door and window in the classroom, then repeats