Technical Drawing

Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech

Set me a quick recall test on 2. Place dimensions on circles, arcs and chamfers at SS1 lev

Give me a wrong or muddled explanation of 4. Distinguish chain, parallel and running dimen

Set me five practice tasks on dimension circles, arcs, chamfers and vertical, horizontal a

Be my SS1 Technical Drawing teacher for this one point: 1. Identify the types of pictorial

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a

Set me five practice tasks on constructing isometric squares, rectangles, arcs and circles

Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr

Give me a wrong or muddled explanation of 4. Produce a finished isometric drawing of a com

Give me a practical task on building a composite object in isometric from three orthograph

Set me five practice tasks on producing a composite isometric drawing from orthographic vi

Be my SS1 Technical Drawing teacher for this one point: 2. Demonstrate the types of obliqu

Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr

Set me five practice tasks on success: cabinet oblique drawn with receding dimensions corr

Show me a worked example on practise healthy habits with an error somewhere in it. Do not

Show me a worked example on and produce all six line types at correct weight with an error

Show me a worked example on success: every constructed angle within ±1° when checked with

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the