287 prompts matching "Let me explain: True shape of a section of a prism"
Quiz: Assessed AO2, and roof types and members recur in WAEC and NECO
Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T
Spot my mistake: Three applications of special curves in engineering
Write a short SS2 Technical Drawing answer about three applications of special curves in e
Spot my mistake: Two products that use an involute profile
Show me a worked example on two products that use an involute profile with an error somewh
Spot my mistake: The motion at the needle of a treadle sewing machine when the treadle oscillates
Show me a worked example on the motion at the needle of a treadle sewing machine when the
Practice set: The four conic sections and the cutting plane that produces each
Set me five practice tasks on the four conic sections and the cutting plane that produces
Practice set: The completed card assembly
Set me five practice tasks on the completed card assembly, at the level expected in SS2 In
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Spot my mistake: Drawing the auxiliary elevation of a truncated square pyramid on a plane inclined at 50 degrees
Show me a worked example on drawing the auxiliary elevation of a truncated square pyramid
Spot my mistake: Constructing orthographic views of a truncated solid in AutoCAD
Show me a worked example on constructing orthographic views of a truncated solid in AutoCA
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
Spot my mistake: Why a line parallel to a plane appears in true length in the view taken on that plane
Show me a worked example on why a line parallel to a plane appears in true length in the v
Spot my mistake: Solving five given lines for true length
Show me a worked example on solving five given lines for true length with an error somewhe
Spot my mistake: The angle of inclination of the lamina to the horizontal plane to the nearest degree
Show me a worked example on the angle of inclination of the lamina to the horizontal plane
Spot my mistake: The function of a plumb bob
Show me a worked example on the function of a plumb bob with an error somewhere in it. Do
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
Spot my mistake: Seven parts of an arch on a given drawing
Show me a worked example on seven parts of an arch on a given drawing with an error somewh
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Real-life Nigeria: Constructing an involute of a circle and a cycloid on one A3 sheet
Take constructing an involute of a circle and a cycloid on one A3 sheet out of the textboo