Use AI with an adult nearby, and check answers together.

Senior Secondary

Technical Drawing

AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →
Three prompts in each subject are free to try. One subscription opens every subject and every prompt in senior secondary, or subscribe your whole school. Already have a code? Enter it here.
Clear

287 prompts matching "What a locus is and how one is plotted"

Project task: Parts on a real door and window in the classroom, then repeats them on a chart

Give me a practical task on parts on a real door and window in the classroom, then repeats

Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation

Show me how comparing louvred, casement and sliding windows for ventilation works in real

Spot my mistake: The meaning of an arch

Write a short SS2 Technical Drawing answer about the meaning of an arch that contains thre

Spot my mistake: Seven parts of an arch on a given drawing

Show me a worked example on seven parts of an arch on a given drawing with an error somewh

Project task: Calculating the number of risers for a 3000 mm rise at 150 mm per riser

Give me a practical task on calculating the number of risers for a 3000 mm rise at 150 mm

Real-life Nigeria: Sketching two further staircase types and label six parts on each

Show me how sketching two further staircase types and label six parts on each works in rea

Real-life Nigeria: Marking each other's sheets against a five-point checklist

Take marking each other's sheets against a five-point checklist out of the textbook. Descr

Spot my mistake: Why the damp-proof course must be continuous with the damp-proof membrane under the floor

Show me a worked example on why the damp-proof course must be continuous with the damp-pro

Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used

Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me

Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared

I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,

Quiz: Constructing a parabola by the focus and directrix method for an eccentricity of 1

Set me a quick recall test on constructing a parabola by the focus and directrix method fo

Teach me: Drawing the tangent and normal at a stated point on each curve

Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at

Practice set: Comparing the two curves and account for any difference

Give me a practice set on comparing the two curves and account for any difference for SS2

WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Practice set: Describe, with an annotated sketch, one product whose form follows a parabola

Set me five practice tasks on describe, with an annotated sketch, one product whose form f

Quiz: Constructing the involute of a circle of 40 mm diameter for one complete revolution

Quiz me on constructing the involute of a circle of 40 mm diameter for one complete revolu

Let me explain: Constructing the involute of a square and of a regular hexagon of 30 mm side

Act as my study partner. I will teach you constructing the involute of a square and of a r

Teach me: Constructing an epicycloid and a hypocycloid on a stated directing circle

You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a

Quiz: Assessed AO2 and AO3

I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse

WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

© 2026 PromptPaddi Limited. All rights reserved.