185 prompts matching "Drawing a 40 mm side hexagonal prism 80 mm high truncated at 35 degrees"
Spot my mistake: Constructing arcs internally touching, externally enclosing and mixed for two circles
Show me a worked example on constructing arcs internally touching, externally enclosing an
Teach me: 2. Plot the locus of a point on a rotating and a sliding mechanism
Be my SS1 Technical Drawing teacher for this one point: 2. Plot the locus of a point on a
Quiz: 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism
Quiz me on 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism, fr
Practice set: Plotting the loci of a point at a fixed distance from a line
Give me a practice set on plotting the loci of a point at a fixed distance from a line for
Spot my mistake: Plotting the path of a point on a crank mechanism
Show me a worked example on plotting the path of a point on a crank mechanism with an erro
WAEC prep: Success: crank locus plotted at twelve positions forming a smooth closed curve
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: Consolidation of polygons, scales, enlargement and reduction, equal areas, tangency and loci
Show me a worked example on consolidation of polygons, scales, enlargement and reduction,
Quiz: 1. Define and distinguish the ellipse, cycloid, trochoid, involute and helix
I am revising Special Curves for SS1 Technical Drawing. Test me on 1. Define and distingui
Let me explain: 2. Construct an ellipse by the four-centre, concentric-circles and parallelogram methods
Let me talk you through 2. Construct an ellipse by the four-centre, concentric-circles and
Spot my mistake: 3. Construct a cycloid and a trochoid from a rolling circle
Write a short SS1 Technical Drawing answer about 3. Construct a cycloid and a trochoid fro
Teach me: 4. State the engineering applications of each special curve
I am an SS1 student studying Special Curves in Technical Drawing. Explain 4. State the eng
Project task: Concentric-circles method for an ellipse step by step. Students construct an ellipse by all
Give me a practical task on concentric-circles method for an ellipse step by step. Student
Spot my mistake: The meaning of the special curves
Show me a worked example on the meaning of the special curves with an error somewhere in i
WAEC prep: Constructing an ellipse by three methods and a cycloid
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Let me explain: 3. Determine true lengths of the edges of full and truncated solids
I am going to explain 3. Determine true lengths of the edges of full and truncated solids
Real-life Nigeria: Rotation method for finding the true length of a slant edge. Students determine true lengths
Show me how rotation method for finding the true length of a slant edge. Students determin
Spot my mistake: The meaning of development and its applications
Show me a worked example on the meaning of development and its applications with an error
WAEC prep: Preparing pyramid and cone developments
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Spot my mistake: 4. Produce models of geometrical solids from their developments and evaluate accuracy
Show me a worked example on 4. Produce models of geometrical solids from their development
WAEC prep: Success: truncated cylinder model assembled
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o