287 prompts matching "Let me explain: Bolts, studs and set screws"
WAEC prep: Four advantages and two limitations of CAD compared with drawing-board work
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
WAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Project a point in the first quadrant onto the horizontal
I am an SS2 student studying Traces of Points and Lines in Technical Drawing. Explain proj
Practice set: Two planes from two sheets of card at right angles
Give me a practice set on two planes from two sheets of card at right angles for SS2 Techn
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
WAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Sketching freehand pictorial views of four selected tools in correct proportion
Set me a quick recall test on sketching freehand pictorial views of four selected tools in
Spot my mistake: The meaning of an opening in a building
Show me a worked example on the meaning of an opening in a building with an error somewher
Spot my mistake: Five types of door and five types of window
Show me a worked example on five types of door and five types of window with an error some
WAEC prep: Why an arch is built with an odd number of voussoirs and a keystone at the crown
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Real stair in the school with the class
Give me a practice set on real stair in the school with the class for SS2 Technical Drawin
Spot my mistake: Drawing a sectional elevation of a dog-leg staircase to 1:50 and label eight parts
Show me a worked example on drawing a sectional elevation of a dog-leg staircase to 1:50 a
Spot my mistake: Why the damp-proof course must be continuous with the damp-proof membrane under the floor
Show me a worked example on why the damp-proof course must be continuous with the damp-pro
Quiz: Lean-to, gable, hipped, gambrel, mansard and flat roofs
Set me a quick recall test on lean-to, gable, hipped, gambrel, mansard and flat roofs at S
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Project task: Roll a tin lid along a straight edge and plot
Give me a practical task on roll a tin lid along a straight edge and plot from Loci and Sp
Practice set: Sketching the locus of a point on the rim of a wheel rolling along a straight road
Set me five practice tasks on sketching the locus of a point on the rim of a wheel rolling
Practice set: Describe, with an annotated sketch, one product whose form follows a parabola
Set me five practice tasks on describe, with an annotated sketch, one product whose form f
Quiz: Assessed AO2 and AO3
I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse