Technical Drawing

Set me five practice tasks on dimension circles, arcs, chamfers and vertical, horizontal a

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

You are my personal SS1 Technical Drawing tutor. Teach me 1. Construct isometric squares a

Set me five practice tasks on constructing isometric squares, rectangles, arcs and circles

Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr

Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr

Set me five practice tasks on success: cabinet oblique drawn with receding dimensions corr

Write a short SS1 Technical Drawing answer about 2. Draw a circle and label its parts corr

Write a short SS1 Technical Drawing answer about 2. Identify standard line types and their

Write a short SS1 Technical Drawing answer about 1. Construct an arc of given radius inter

Write a short SS1 Technical Drawing answer about 3. Construct a cycloid and a trochoid fro

Show me a worked example on practise healthy habits with an error somewhere in it. Do not

Show me a worked example on and produce all six line types at correct weight with an error

Show me a worked example on success: every constructed angle within ±1° when checked with

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on constructing an inscribed, a circumscribed and an escribed cir

Show me a worked example on 2. State the properties of each type of quadrilateral with an

Show me a worked example on constructing special quadrilaterals and one from four sides an

Show me a worked example on drawing and interpret both projection symbols with an error so

Show me a worked example on achieve at least 60% on a full mock paper with an error somewh