287 prompts matching "Let me explain: True shape of a section of a prism"
WAEC prep: Plotting the locus of the mid-point of the connecting rod for twelve crank positions
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Modelling-clay cone at four angles in front of the class
Give me a practice set on modelling-clay cone at four angles in front of the class for SS2
Practice set: One truncated hexagonal prism on the board
Give me a practice set on one truncated hexagonal prism on the board for SS2 Technical Dra
Spot my mistake: Cut, fold and assemble the developments in cardboard
Show me a worked example on cut, fold and assemble the developments in cardboard with an e
Spot my mistake: Suggest, with reasons, a suitable board thickness and folding method for a small retail carton
Show me a worked example on suggest, with reasons, a suitable board thickness and folding
WAEC prep: Develop the branch prism and mark the opening required in the main prism
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Visual ray method, drawing rays from the station point through each plan corner to the picture
Take visual ray method, drawing rays from the station point through each plan corner to th
WAEC prep: The difference between first and third angle projection in terms of where the plan is placed
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Dimension a drawing using the aligned and the unidirectional system
Show me a worked example on dimension a drawing using the aligned and the unidirectional s
Real-life Nigeria: Drawing and fully dimension a bracket in third angle projection
Take drawing and fully dimension a bracket in third angle projection out of the textbook.
Practice set: Making a card version of the partner's bracket
Give me a practice set on making a card version of the partner's bracket for SS2 Technical
Spot my mistake: Constructing an isometric view from given orthographic views by the box method on 30 degree axes
Write a short SS2 Technical Drawing answer about constructing an isometric view from given
WAEC prep: Why hatching lines on a section are drawn at 45 degrees and spaced evenly
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Comparing their auxiliary outline of the cone
Give me a practice set on comparing their auxiliary outline of the cone for SS2 Technical
WAEC prep: Drawing the auxiliary plan of a 60 mm high cone on a plane inclined at 45 degrees
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
WAEC prep: Four advantages and two limitations of CAD compared with drawing-board work
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
WAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Project a point in the first quadrant onto the horizontal
I am an SS2 student studying Traces of Points and Lines in Technical Drawing. Explain proj
Practice set: Two planes from two sheets of card at right angles
Give me a practice set on two planes from two sheets of card at right angles for SS2 Techn
WAEC prep: Determine the horizontal and vertical traces of a line given its plan and elevation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o