Use AI with an adult nearby, and check answers together.

Senior Secondary

Technical Drawing

AI prompts for senior secondary learners.
📅 36-Week WAEC Study Guide for Technical Drawing →
Three prompts in each subject are free to try. One subscription opens every subject and every prompt in senior secondary, or subscribe your whole school. Already have a code? Enter it here.
Clear

287 prompts matching "Four-centre ellipse inside an isometric rhombus. Students construct isometric ci"

Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on

Give me a practice set on card triangle in the two-plane model and turns it until the clas

Spot my mistake: The angle of inclination of the lamina to the horizontal plane to the nearest degree

Show me a worked example on the angle of inclination of the lamina to the horizontal plane

WAEC prep: The difference between the trace of a line and the trace of a plane

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Practice set: Practising crating and proportion exercises

Give me a practice set on practising crating and proportion exercises for SS2 Technical Dr

Spot my mistake: The meaning of a foundation and a floor

Give me a wrong or muddled explanation of the meaning of a foundation and a floor from the

Practice set: Examining photographs of local soils and foundations

Give me a practice set on examining photographs of local soils and foundations for SS2 Tec

Practice set: The purpose of the damp-proof course and the hardcore layer

Set me five practice tasks on the purpose of the damp-proof course and the hardcore layer,

Spot my mistake: The meaning of an opening in a building

Show me a worked example on the meaning of an opening in a building with an error somewher

Teach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding

You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl

Quiz: The parts of a door and of a window: frame

I am revising Openings I: Doors and Windows for SS2 Technical Drawing. Test me on the part

Let me explain: Drawing to 1:10 the elevation and horizontal section of a casement window

Let me talk you through drawing to 1:10 the elevation and horizontal section of a casement

Project task: Parts on a real door and window in the classroom, then repeats them on a chart

Give me a practical task on parts on a real door and window in the classroom, then repeats

Real-life Nigeria: Comparing louvred, casement and sliding windows for ventilation

Show me how comparing louvred, casement and sliding windows for ventilation works in real

Spot my mistake: Five types of door and five types of window

Show me a worked example on five types of door and five types of window with an error some

WAEC prep: Drawing to 1:10 the elevation of a casement window and label six parts

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

Practice set: Louvred against sliding windows for a classroom in a hot, humid town and justify your choice

Set me five practice tasks on louvred against sliding windows for a classroom in a hot, hu

Practice set: Compression in an arch by building a small arch of wooden blocks over a former

Give me a practice set on compression in an arch by building a small arch of wooden blocks

Project task: Set out a segmental arch of 900 mm span

Set me a small project on set out a segmental arch of 900 mm span, the kind I could finish

Spot my mistake: Seven parts of an arch on a given drawing

Show me a worked example on seven parts of an arch on a given drawing with an error somewh

WAEC prep: Why an arch is built with an odd number of voussoirs and a keystone at the crown

Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o

© 2026 PromptPaddi Limited. All rights reserved.