280 prompts matching "1. Demonstrate safe handling of the drawing board, T-square and compass"
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
WAEC prep: Drawing the true shape of the cut face of a square pyramid of 50 mm base truncated at 40
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Drawing the lines of intersection of two square prisms meeting at 90 degrees
Show me a worked example on drawing the lines of intersection of two square prisms meeting
Spot my mistake: Drawing the auxiliary views of a full hexagonal prism and a square pyramid
Show me a worked example on drawing the auxiliary views of a full hexagonal prism and a sq
Spot my mistake: Drawing the auxiliary elevation of a truncated square pyramid on a plane inclined at 50 degrees
Show me a worked example on drawing the auxiliary elevation of a truncated square pyramid
Real-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
Let me explain: Determine the true shape of the cut face of a square pyramid truncated by an inclined plane
I am going to explain determine the true shape of the cut face of a square pyramid truncat
Project task: Determine the intersection of a 30 mm square prism entering a 50 mm hexagonal prism at 60
Give me a practical task on determine the intersection of a 30 mm square prism entering a
Real-life Nigeria: Time the CAD version against the board version of the same block from Week 5
Show me how time the CAD version against the board version of the same block from Week 5 w
WAEC prep: Four advantages and two limitations of CAD compared with drawing-board work
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Comparing the CAD auxiliary with their Week 8 board drawing
Take comparing the CAD auxiliary with their Week 8 board drawing out of the textbook. Desc
Let me explain: Constructing the involute of a square and of a regular hexagon of 30 mm side
Act as my study partner. I will teach you constructing the involute of a square and of a r
Quiz: Drawing a slider-crank mechanism and plot the locus of the mid-point of the connecting rod
Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con
Project task: Drawing the plan and elevation of a 60 mm diameter
Give me a practical task on drawing the plan and elevation of a 60 mm diameter from True S
Teach me: Drawing the front elevation, plan and end elevation of a given shaped block in first angle
Be my SS2 Technical Drawing teacher for this one point: drawing the front elevation, plan
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Project task: Up a poorly dimensioned drawing on the board
Set me a small project on up a poorly dimensioned drawing on the board, the kind I could f
Spot my mistake: Drawing an isometric circle of 40 mm diameter by the four-centre method
Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent
Spot my mistake: Drawing a first auxiliary elevation of a shaped block on a plane inclined at 45 degrees to the
Give me a wrong or muddled explanation of drawing a first auxiliary elevation of a shaped
Teach me: Drawing a first auxiliary plan of the same block, transferring heights from the elevation
Be my SS2 Technical Drawing teacher for this one point: drawing a first auxiliary plan of