275 prompts matching "4. Identify the constructions used to transfer area between shapes"
Practice set: Paper tube into a slot cut in a larger tube to show the saddle curve before the construction is
Give me a practice set on paper tube into a slot cut in a larger tube to show the saddle c
Practice set: Why the height of a point is transferred unchanged into an auxiliary elevation
Set me five practice tasks on why the height of a point is transferred unchanged into an a
Teach me: How a second auxiliary view is used to obtain the true shape of a face inclined to both
You are my personal SS2 Technical Drawing tutor. Teach me how a second auxiliary view is u
WAEC prep: The sequence of commands used to obtain the auxiliary view
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Project task: Drawing a 6 m span king post truss to 1:20, labelling eight members and stating the pitch used
Give me a practical task on drawing a 6 m span king post truss to 1:20, labelling eight me
Real-life Nigeria: Focus-directrix construction step by step on the demonstration board
Show me how focus-directrix construction step by step on the demonstration board works in
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Teach me: Drawing a first auxiliary plan of the same block, transferring heights from the elevation
Be my SS2 Technical Drawing teacher for this one point: drawing a first auxiliary plan of
Practice set: Why layers, rather than a single drawing layer, are used for outline and hidden detail
Set me five practice tasks on why layers, rather than a single drawing layer, are used for
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: What happens to the output at a dead-centre position
Show me a worked example on what happens to the output at a dead-centre position with an e
Quiz: Determine the true shape of a right cone truncated at 45 degrees to the axis
I am revising True Shapes I for SS2 Technical Drawing. Test me on determine the true shape
Practice set: Cutting paper cylinder to show that the seam edge of the development is the stretch-out
Give me a practice set on cutting paper cylinder to show that the seam edge of the develop
Practice set: Out the standard layout on the board, moving the station point twice to show the distortion
Give me a practice set on out the standard layout on the board, moving the station point t
Project task: Photograph or sketch a corridor in the school
Set me a small project on photograph or sketch a corridor in the school, the kind I could
Let me explain: Rendering the finished view with tone and texture to distinguish two materials
I am going to explain rendering the finished view with tone and texture to distinguish two
Real-life Nigeria: Visual ray method, drawing rays from the station point through each plan corner to the picture
Take visual ray method, drawing rays from the station point through each plan corner to th
Project task: Card box round a small block to show the three planes opening out into the three views
Give me a practical task on card box round a small block to show the three planes opening
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
WAEC prep: The difference between first and third angle projection in terms of where the plan is placed
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o