284 prompts matching "Blending arcs and lines by tangency"
Let me explain: Constructing a parabola inside a given rectangle 100 mm by 60 mm by the intersecting-lines
I am going to explain constructing a parabola inside a given rectangle 100 mm by 60 mm by
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Quiz: Determine the true shape of the cut face of a hexagonal prism truncated by an inclined plane
Set me a quick recall test on determine the true shape of the cut face of a hexagonal pris
Let me explain: Determine the true shape of the cut face of a square pyramid truncated by an inclined plane
I am going to explain determine the true shape of the cut face of a square pyramid truncat
Practice set: What is meant by the first quadrant and why technical drawing works within it
Set me five practice tasks on what is meant by the first quadrant and why technical drawin
Teach me: Determine the true length of a line inclined to both planes by the rotation method
Be my SS2 Technical Drawing teacher for this one point: determine the true length of a lin
Quiz: Determine the true length of the same line by the auxiliary plane method
Quiz me on determine the true length of the same line by the auxiliary plane method, from
Project task: Solving five lines by the rotation method
Set me a small project on solving five lines by the rotation method, the kind I could fini
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Quiz: Constructing a parabola by the focus and directrix method for an eccentricity of 1
Set me a quick recall test on constructing a parabola by the focus and directrix method fo
Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another
Show me a worked example on why the cut face appears as a straight line in one view and an
Teach me: And locate the ground line, horizon, station point
You are my personal SS2 Technical Drawing tutor. Teach me and locate the ground line, hori
Quiz: Drawing a circle in perspective by enclosing it in a square and plotting eight points
Set me a quick recall test on drawing a circle in perspective by enclosing it in a square
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Project task: Enclosing box on the board and removes material step by step so the class sees the isometric
Give me a practical task on enclosing box on the board and removes material step by step s
WAEC prep: Why hatching lines on a section are drawn at 45 degrees and spaced evenly
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Drawing the second auxiliary elevation of a shaped block and label both new ground lines
Show me a worked example on drawing the second auxiliary elevation of a shaped block and l
Project task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Practice set: Why layers, rather than a single drawing layer, are used for outline and hidden detail
Set me five practice tasks on why layers, rather than a single drawing layer, are used for