228 prompts matching "Develop the branch prism and mark the opening required in the main prism"
Teach me: 1. Prepare the pattern development of a prism and of a cylinder
Be my SS1 Technical Drawing teacher for this one point: 1. Prepare the pattern development
Quiz: 2. Prepare the development of truncated prisms and cylinders
Quiz me on 2. Prepare the development of truncated prisms and cylinders, from the SS1 Tech
Spot my mistake: 4. Prepare the pattern development of a pyramid and of a cone
Give me a wrong or muddled explanation of 4. Prepare the pattern development of a pyramid
Spot my mistake: The meaning of development and its applications
Show me a worked example on the meaning of development and its applications with an error
Spot my mistake: 4. Produce models of geometrical solids from their developments and evaluate accuracy
Show me a worked example on 4. Produce models of geometrical solids from their development
Spot my mistake: Preparing developments of prisms and cylinders and develop models of geometrical solids
Show me a worked example on preparing developments of prisms and cylinders and develop mod
Practice set: Set out parallel-line developments for a truncated hexagonal prism
Give me a practice set on set out parallel-line developments for a truncated hexagonal pri
WAEC prep: Preparing pyramid and cone developments
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Project task: Layout of a title block on the board with proportions marked. Students draw a border
Give me a practical task on layout of a title block on the board with proportions marked.
Quiz: 2. Identify the types of angles: acute, right, obtuse, reflex, complementary and supplementary
Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle
Spot my mistake: 4. Construct any acute angle using the tangent and the sine methods, and bisect a given angle
Give me a wrong or muddled explanation of 4. Construct any acute angle using the tangent a
Quiz: 4. Construct a triangle equal in area to a given quadrilateral and locate the centroid
I am revising Angles and Triangles II for SS1 Technical Drawing. Test me on 4. Construct a
WAEC prep: The classification of triangles by side and by angle
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o
Quiz: 2. Identify the types of scales: plain, diagonal, comparative and vernier
Set me a quick recall test on 2. Identify the types of scales: plain, diagonal, comparativ
Practice set: Enlarge and reduce plane figures based on the ratio of areas and verify the result
Set me five practice tasks on enlarge and reduce plane figures based on the ratio of areas
Practice set: Completing the four standard equal-area constructions on one sheet
Give me a practice set on completing the four standard equal-area constructions on one she
Practice set: Demonstrating and carry out the construction of plane figures of equal area
Set me five practice tasks on demonstrating and carry out the construction of plane figure
Quiz: 3. Construct an arc touching one circle internally and enclosing the other externally
Set me a quick recall test on 3. Construct an arc touching one circle internally and enclo
Let me explain: 4. Blend arcs and lines smoothly, marking all points of tangency
I am going to explain 4. Blend arcs and lines smoothly, marking all points of tangency to
WAEC prep: Success: all blends visually smooth with tangency points marked and radii within 0.5 mm
Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o