283 prompts matching "Producing a hazard-and-control chart"
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Project task: Parts on a real door and window in the classroom, then repeats them on a chart
Give me a practical task on parts on a real door and window in the classroom, then repeats
Teach me: Producing an isometric drawing of a shaped block
Be my SS2 Technical Drawing teacher for this one point: producing an isometric drawing of
Quiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Let me explain: Producing a one-point perspective of the block
Act as my study partner. I will teach you producing a one-point perspective of the block i
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Teach me: Examined with the command words state, describe and explain
I am an SS2 student studying Loci and Special Curves in Technical Drawing. Explain examine
Project task: Roll a tin lid along a straight edge and plot
Give me a practical task on roll a tin lid along a straight edge and plot from Loci and Sp
Quiz: Constructing a parabola by the focus and directrix method for an eccentricity of 1
Set me a quick recall test on constructing a parabola by the focus and directrix method fo
Spot my mistake: Constructing a hyperbola from given foci and a constant difference of 30 mm
Give me a wrong or muddled explanation of constructing a hyperbola from given foci and a c
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
Practice set: Comparing the two curves and account for any difference
Give me a practice set on comparing the two curves and account for any difference for SS2
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Constructing the involute of a square and of a regular hexagon of 30 mm side
Act as my study partner. I will teach you constructing the involute of a square and of a r
Teach me: Constructing an epicycloid and a hypocycloid on a stated directing circle
You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a
Quiz: Assessed AO2 and AO3
I am revising Constructing Special Curves II for SS2 Technical Drawing. Test me on assesse
Real-life Nigeria: Constructing an involute of a circle and a cycloid on one A3 sheet
Take constructing an involute of a circle and a cycloid on one A3 sheet out of the textboo
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: The meaning of link, joint, crank, lever, slider and frame
Let me talk you through the meaning of link, joint, crank, lever, slider and frame from th
Spot my mistake: Clockwise and anticlockwise motion and rotary from oscillating
Write a short SS2 Technical Drawing answer about clockwise and anticlockwise motion and ro