287 prompts matching "Quiz: 2. Define isometric drawing and the isometric axes at 30° to the horizonta"
Quiz: Drawing a slider-crank mechanism and plot the locus of the mid-point of the connecting rod
Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con
Project task: Enclosing box on the board and removes material step by step so the class sees the isometric
Give me a practical task on enclosing box on the board and removes material step by step s
Quiz: Drawing a second auxiliary elevation and a second auxiliary plan of a shaped block
Quiz me on drawing a second auxiliary elevation and a second auxiliary plan of a shaped bl
WAEC prep: Measuring and state the major and minor axes of the true shape obtained, in millimetres
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
Let me explain: Graphic Products candidates meet the same content when drawing moving parts
I am going to explain graphic Products candidates meet the same content when drawing movin
Project task: Drawing the plan and elevation of a 60 mm diameter
Give me a practical task on drawing the plan and elevation of a 60 mm diameter from True S
Quiz: Drawing a rectangular block in one-point perspective from a given plan and elevation
I am revising Perspective Drawing I for SS2 Technical Drawing. Test me on drawing a rectan
Teach me: Drawing the front elevation, plan and end elevation of a given shaped block in first angle
Be my SS2 Technical Drawing teacher for this one point: drawing the front elevation, plan
Spot my mistake: Drawing the second auxiliary elevation of a shaped block and label both new ground lines
Show me a worked example on drawing the second auxiliary elevation of a shaped block and l
Let me explain: Drawing the auxiliary elevation and auxiliary plan of a truncated cone and a truncated cylinder
Let me talk you through drawing the auxiliary elevation and auxiliary plan of a truncated
Spot my mistake: Drawing the auxiliary elevation and auxiliary plan of a truncated hexagonal prism
Write a short SS2 Technical Drawing answer about drawing the auxiliary elevation and auxil
Spot my mistake: Producing and plot an isometric drawing of a given block at 1:1 on A3
Show me a worked example on producing and plot an isometric drawing of a given block at 1:
Practice set: Why layers, rather than a single drawing layer, are used for outline and hidden detail
Set me five practice tasks on why layers, rather than a single drawing layer, are used for
Spot my mistake: Drawing the plan and elevation of five points at stated distances above the HP
Show me a worked example on drawing the plan and elevation of five points at stated distan
Practice set: What is meant by the first quadrant and why technical drawing works within it
Set me five practice tasks on what is meant by the first quadrant and why technical drawin
Let me explain: Drawing to 1:10 the elevation and horizontal section of a casement window
Let me talk you through drawing to 1:10 the elevation and horizontal section of a casement
WAEC prep: Drawing to 1:10 the elevation of a casement window and label six parts
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Drawing the sectional elevation and plan of a dog-leg staircase for a floor-to-floor height of
Act as my study partner. I will teach you drawing the sectional elevation and plan of a do